Uncompressing Linux............................................................. ......................... done, booting the kernel. Linux version 2.4.27-vrs1-pxa1-adsx4 (rwhaley@rwhaley) (gcc version 3.3.2) #1 Mo n May 16 12:37:28 EDT 2005 CPU: XScale-PXA255 revision 6 Machine: ADS BitsyX Memory clock: 99.53MHz (*27) Run Mode clock: 398.13MHz (*4) Turbo Mode clock: 398.13MHz (*1.0, active) On node 0 totalpages: 16384 zone(0): 256 pages. zone(1): 16128 pages. zone(2): 0 pages. Kernel command line: console=ttyS1,38400 SERIALGETTY=ttyS1 rw mtdparts=pxa:256k( adslinux.rom),1536k(zImage),-(flashfs1) root=/dev/mtdblock2 rootfstype=jffs2 noi nitrd quiet_console=null Console: colour dummy device 80x30 Calibrating delay loop... 397.31 BogoMIPS Memory: 64MB = 64MB total Memory: 61912KB available (2366K code, 402K data, 104K init) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) CPU: Testing write buffer: pass POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket BlueZ Core ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky SA1111 Microprocessor Companion Chip: silicon revision 1, metal revision 1 ADS CPLD REV: 0x9 Probing for CFBUS not found. Probing for adsbitsyx smc91x found it! Using PXA255 frequency points. Registering CPU frequency change support. CPU clock: 398.131 MHz (99.000-398.100 MHz) Starting kswapd Journalled Block Device driver loaded JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module version 2.6.1 (20010830) I2C: PXA algorithm module loaded. I2C: Adding PXA-I2C-Adapter. I2C: Scanning bus (20)(68) I2C: Successfully added bus Console: switching to colour frame buffer device 80x30 ADSmartIO ID : 0x0010 Firmware Version : 4 Device Type : 0x8535 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0x0000 (irq = 15) is a PXA UART ttyS01 at 0x0000 (irq = 14) is a PXA UART ttyS02 at 0x0000 (irq = 13) is a PXA UART ads784x_ts_init_module: registering char device smartio driver initialized. version 1.14, date: 26-Mar-2004 SA1100/PXA Watchdog Timer: timer margin 60 sec I2C: DS1307 RTC driver successfully loaded RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) smc91x.c: v1.0, mar 07 2003 by Nicolas Pitre eth0: SMC91C11xFD (rev 1) at 0xf0000300 IRQ 50 [nowait] [throttle_tx] eth0: Ethernet addr: 00:60:0c:00:86:1f PPP generic driver version 2.4.2 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem driver Revision: 1.00 ac97_codec: AC97 Audio codec, id: CRY115 (Cirrus Logic CS4202) Probing PXA flash at physical address 0x00000000 cfi_cmdset_0001: Erase suspend on write enabled Using buffer write method Using Command Line partition definition Creating 3 MTD partitions on "PXA flash": 0x00000000-0x00040000 : "adslinux.rom" 0x00040000-0x001c0000 : "zImage" 0x001c0000-0x04000000 : "flashfs1" Found K3 Flash - will unlock on resume from sleep Linux Kernel Card Services 3.1.22 options: [pm] Intel PXA250/210 PCMCIA (CS release 3.1.22) hostap_cs: 0.3.7 - 2005-02-12 (Jouni Malinen ) usb.c: registered new driver usbdevfs usb.c: registered new driver hub hcd/ohci-sa1111.c: ohci-hcd (SA-1111) at 0xf4000400, irq 148 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 1 port detected hub.c: no over-current condition exists usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.11 loaded. pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 a nd MPC-C30, pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100 . usb.c: registered new driver Philips webcam ov511.c: Error: /proc/video/ does not exist usb.c: registered new driver ov511 ov511.c: v1.65 : ov511 USB Camera Driver ov511_decomp.c: v1.6 : OV511 Decompression Module pegasus.c: v0.4.32 (2003/06/06):Pegasus/Pegasus II USB Ethernet driver usb.c: registered new driver pegasus usb.c: registered new driver usbnet Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. pxa2xx_udc: version 5-Jan-2004 port 1, portstatus 101, change 1 usb0: Ethernet Gadget, pxa2xx, version: Bastille Day 2003 Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice BlueZ HCI USB driver ver 2.7 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky usb.c: registered new driver hci_usb NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (512 buckets, 4096 max) - 296 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky BlueZ RFCOMM ver 1.1 Copyright (C) 2002 Maxim Krasnyansky Copyright (C) 2002 Marcel Holtmann BlueZ BNEP ver 1.2 Copyright (C) 2001,2002 Inventel Systemes Written 2001,2002 by Clement Moreau Written 2001,2002 by David Libault Copyright (C) 2002 Maxim Krasnyanskiy Fast Floating Point Emulator V0.94M by Peter Teichmann. VFS: Mounted root (jffs2 filesystem). Freeing init memory: 104K hub.c: new USB device sa1111-1, assigned address 2 hub.c: USB hub found hub.c: 4 ports detected hub.c: no over-current condition exists INIT: version 2.86 booting Setting up RAMFS, please wait... port 1, portstatus 101, change 1 Cleaning up ifupdown...done. Checking all file systems... fsck 1.38 (30-Jun-2005) Setting kernel variables ... ... done. Mounting local filesystems... hub.c: new USB device sa1111-1.1, assigned address 3 ov511.c: USB OV511+ video device found ov511.c: model: Creative Labs WebCam 3 mount: Mounting /dev/root on / failed: No such file or directory Cleaning /tmpov511.c: Sensor is an OV7620 /var/run. ov511.c: Device at usb-sa1111-1.1 registered to minor 0 port 3, portstatus 301, change 1 readlink: /etc/resolv.conf: Invalid argument Setting up networking...done. hub.c: new USB device sa1111-1.3, assigned address 4 input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical.] on usb1:4. 0 Starting hotplug subsystem: pci ** can't synthesize pci hotplug events pci [failed] usb ** can't synthesize root hub events usb [success] isapnp isapnp [success] ide ide [success] input input [failed] scsi scsi [success] done. Setting up IP spoofing protection: rp_filter. Configuring network interfaces...done. Starting portmap daemon: portmapdhcpcd.exe: interface eth0 has been configured w ith old IP=192.168.1.48 . Cleaning. Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Wed Sep 14 17:13:39 UTC 2005 Running ntpdate to synchronize clock. readlink: /etc/motd: Invalid argument Initializing random number generator...done. Setting up X server socket directory /tmp/.X11-unix...done. Setting up ICE socket directory /tmp/.ICE-unix...done. INIT: Entering runlevel: 3 Starting system log daemon: syslogd/usr/local/sbin/extsleep.sh: line 13: /usr/lo cal/sbin/catch_sleep.sh: No such file or directory . Starting kernel log daemon: klogd. Starting portmap daemon: portmap. Starting system message bus: Failed to start message bus: Failed to read directo ry "/etc/dbus-1/system.d": No such file or directory wpasupplicant: disabled, see /etc/default/wpasupplicant Restoring mixer settings: mixer, done. Starting periodic command scheduler: cron. cardmgr[229]: cannot access /lib/modules/2.4.27-vrs1-pxa1-adsx4: No such file or directory cardmgr[229]: watching 2 sockets Debian GNU/Linux testing/unstable (Wed) adsdebian ttyS1 adsdebian login: Could not init font path element /usr/X11R6/lib/X11/fonts/100dp i/, removing from list! port 2, portstatus 101, change 1 hub.c: new USB device sa1111-1.2, assigned address 5 scsi0 : SCSI emulation for USB Mass Storage devices Vendor: ExcelSto Model: r Technology J68 Rev: 0 0 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) Partition check: sda: sda1 sda2 sda3 < sda5 > Debian GNU/Linux testing/unstable (Wed) adsdebian ttyS1 adsdebian login: