All Forums
 Microsoft Windows CE
 CE Sample Applications and Utilities
 eVC - KeypadMonitor		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

ctacke

877 Posts
Posted - 03 Jul 2003 :  09:44:18  Show Profile  Email Poster
KeypadMonitor.exe

This project configures the ADSmartIO for keypad scanning, then continually monitors for keypad input and reports keypad activity on the device's debug port.

This project requires the ADSmartIO wrapper class 720020-1153x

NOTE: This is an eVC 4.0 project and the downloadable binary will run only on CE 4.x. For CE 3.0 devices you must compile the source with eVC 3.0.

Key APIs Used

SelectOption
SetKeypadSize
ReadKeypad

Lines of Code: 20


Source Download
Rev 1 - July 3, 2003 (5k zip).

modified Sept 26, 03 (ctacke) - updated project files

t0671dl

27 Posts
Posted - 26 Sep 2003 :  13:59:10  Show Profile  Email Poster
This application while functional is very primative. Needs a better user interface. The project file refernces "ADSmartIOHelper.cpp" and "ADSmartIOHelper.h" which do not exist. You have to get the "ADSmartIO wrapper class" and rename the two files to match the referenced file names in the sVC4.0 project.
Go to Top of Page

ctacke

877 Posts
Posted - 26 Sep 2003 :  15:16:16  Show Profile  Email Poster
Most of our samples are fairly primitive (I see that this one is only 20 lines of code) and are designed to specifically show how to perform a task that at some point we had a query for in our customer support channel.

The reason we didn't include the wrapper class code in the download is simply for maintainability. If the wrapper class code gets updated, we'd like to avoid having to update all of the dependant downloads as well.

Sorry about the bad references in the project file itself - I've updated the project to use the smartio.h and smartio.cpp files from the wrapper class and put them into the download file.
Go to Top of Page

t0671dl

27 Posts
Posted - 26 Sep 2003 :  15:41:25  Show Profile  Email Poster
I posted the item only for some who might have have not understood what was happening in the code. You guys are doing a GREAT JOB!!!!

And as always Thanks for your help.....
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000