All Forums
 Hardware
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 bridged audio operation for higher power?
 Forum Locked
 Printer Friendly
Author Topic  

rob.chavez

1 Posts

Posted - 09 Sep 2003 :  13:29:06  Show Profile
Hi,

can the right and left audio channels be bridged for an increase in output power?

thx, rc

Edited by - rob.chavez on 09 Sep 2003 13:51:49

akidder

1519 Posts

Posted - 09 Sep 2003 :  15:15:05  Show Profile
Hi Rob. Thanks for your post. I'm going to assume you're talking about the BitsyX. Let me know if otherwise.

The BitsyX audio amp already includes a two-channel, bridge-tied amplifier. You can read more about the audio systems and the LM4863 amp we use in the BitsyX user manual (section 6.2, Audio).

I guess you're asking for more than the 2.2W/channel that the system can already deliver? You might try dropping the impedance of your speaker to get higher power output. If that doesn't help, you'll need to use an external amplifier.

Let us know if this helps!
Go to Top of Page
  Topic  
 Forum Locked
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.06 seconds. Snitz Forums 2000