All Forums
 Microsoft Windows CE
 CE Downloads and Documents
 AGX Boot Code
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

akidder

1519 Posts

Posted - 06 Oct 2003 :  16:41:57  Show Profile  Email Poster
AGX Windows CE Boot Code

Boot code for the AGX is stored in onboard flash and can be updated in the field. You may need to do this to support performance improvements or newer features of Windows CE builds.

Select the boot code for your system based on the amount of DRAM installed.

Instructions for updating the boot code are found in the Developer's Getting Started Guide.

Related topics: AGX CE files page, AGX User Manual

64 MiB DRAM
Rev 2 AGX

1.10 (10-Aug-2006)
- Doesn't turn on Vee at boot (reduces sleep current)

1.09 (14-Mar-2006)
- Supports 64 MiB flash with the following HWT file entry (multiples of 32MB above the base of 32 MiB flash):
0xA1E30148 1 ; 0=32 MiB flash, 1=64MiB, 3=128MiB
- Turns on Vee at boot

1.08 (22-Sept-2005)
- New format for debug message output
- Meets specs for panel power sequencing

1.06 (04-Mar-2004)
- Supports 64MB Flash boards
Contact us if you need version 1.06.

1.04 (04-Mar-2004)
- Supports displaying ADSLOAD.BMP during boot
- Disable debug output by setting DIP switch 2 ON
Contact us if you need version 1.04.

1.03 (12-Sep-2003)
- Run and Turbo mode are both 400 MHz
- Assembly portion of boot code displays debug message

1.02 (21-Jul-2003)
- Supports hardware UART (Serial 1) as debug port
Contact us if you need version 1.02.



Edited by akidder 26-Mar-2004: Add v 1.03 and 1.04; correct 1.02 release number from 700115-41012 to 700115-41151
Edited by akidder 7-Jul-2006: Add boot 1.09
Edited by ljoy 22-Oct-2007: Removed links to old software; available upon request

bsamuels

53 Posts

Posted - 30 Sep 2005 :  10:44:03  Show Profile  Email Poster
Boot Loader Version 1.08 has been released.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000