All Forums
 Hardware
 Displays
 Cannot close window by clicking "close" button
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts

Posted - 26 Feb 2002 :  15:20:41  Show Profile  Email Poster
Q: Why doesn't the touch panel respond when I try to close a window by tapping in the upper-right corner?

Your touch panel may not be calibrated well. From the Control Panel, tap the Stylus icon. Select Recalibrate and carefully press an release the center of each crosshair. If you installed the touch panel yourself, make sure that the active area of the touch panel covers the entire display area.


For further reading about touch panels on ADS products, see the touch panel topic index.

------------------
ADS Knowledge Base

rdall

16 Posts

Posted - 05 May 2006 :  18:58:13  Show Profile  Email Poster
I have calibrated the panel many times, but the alignment remains seriously out. Using a Bitsy Xb with CE 5.00.14. Could my touch panel be faulty?
Go to Top of Page

ctacke

877 Posts

Posted - 05 May 2006 :  21:59:01  Show Profile  Email Poster
Is it a standard 6.4" panel or is it larger?
Go to Top of Page

rdall

16 Posts

Posted - 08 May 2006 :  10:04:09  Show Profile  Email Poster
Yes, 6.4" panel, as shipped with your standard development kit.
Go to Top of Page

bsamuels

53 Posts

Posted - 08 May 2006 :  10:28:15  Show Profile  Email Poster
We have noted some touch screen performance issues with build 5.00.14, and are currently working on fixing this problem. We will update the BitsyXb CE build page when a new build is released with the fix.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000