All Forums
 Hardware
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 Using the onboard DIP switches		  Forum Locked
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts
Posted - 26 Feb 2002 :  15:45:29  Show Profile
Q: Can I use the onboard DIP switches in my application?

You can read the DIP switches from your application, but the settings themselves are reserved for use by the CE bootloader. You can also connect DIP or other switches to the digital inputs of your device. The Smart IO inputs on the Graphics Client even have built-in pull-up resistors that can be enabled by your application.



------------------
ADS Knowledge Base

HBPayne

45 Posts
Posted - 04 Mar 2004 :  11:13:04  Show Profile
I would like to read the boot dip switch on BitsyX. Do you have a description or sample code somewhere?
Go to Top of Page

ctacke

877 Posts
Posted - 05 Mar 2004 :  17:41:31  Show Profile
Take a look at the new sample posted at Topic 1413.
Go to Top of Page

HBPayne

45 Posts
Posted - 05 Mar 2004 :  18:27:44  Show Profile
Works great, thanks.
Go to Top of Page
  Topic  
 Forum Locked
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000