All Forums
 Hardware
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 Revision information?		  Forum Locked
 Printer Friendly
Author Topic  

wonbokle

29 Posts
Posted - 09 Feb 2004 :  19:14:12  Show Profile
Hi.

It could be a stupid question but, how can I check the revision information (either Rev. B/Rev. C) of our BitsyX board?

The serial # is 6273.

akidder

1519 Posts
Posted - 10 Feb 2004 :  08:09:18  Show Profile
The revision level is printed on the underside of the printed wiring board, etched in the copper under the green layer of solder mask. The revision level is the last character in the board's part number, which begins with "170".

In your case, since you have a BitsyX, the part number will be "170115-0000r" where r is the revision level of the board.

You can find this information in the last chapter of your BitsyX User's manual.
Go to Top of Page
  Topic  
 Forum Locked
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000