All Forums
 Hardware
 Displays
 Configure BitsyX for different displays
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

MarkHuang

2 Posts

Posted - 17 Jan 2005 :  12:05:07  Show Profile  Email Poster
We want to run four displays from BitsyX: Sharp LQ065T9DR51, Optrex T-51750AB-V350, Toshiba LTD056ET0S and NEC NL6448BC20-14.
Can you provide jumper settings and register settings (Windows CE) for these?
Thanks.

akidder

1519 Posts

Posted - 19 Jan 2005 :  10:51:19  Show Profile  Email Poster
Sure. Email us directly so we know how to reach you (can't send attachements through the forums). We're at support.us@eurotech.com.
Go to Top of Page

jmcclean

1 Posts

Posted - 19 Jan 2005 :  11:08:46  Show Profile  Email Poster
Hi Drew, did my e-mails come through about support for the NEC NL6448BC20-08 display? Haven't heard anything for a day or two and thought they'd maybe got lost in the web. Thanks
Go to Top of Page

Patrick

34 Posts

Posted - 02 Mar 2005 :  15:40:10  Show Profile  Email Poster
Hi guys,
We're using the Sharp LQ038Q5DR01 with the Bitsy Plus and need to get it working with the BitsyX. It's on the supported displays list for BitsyX, but we don't have the config files to make it function.
Can you provide them to us?
Go to Top of Page

akidder

1519 Posts

Posted - 03 Mar 2005 :  18:13:04  Show Profile  Email Poster
Hi Patrick. We'll email you the files. The new timings should work ok, but you'll also need a new cable if your BitsyPlus/SA-1110 cable was 8/12 bpp (details at topic 990).
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000