All Forums
 Microsoft Windows CE
 CE Drivers
 DHCP problem on GCX CE 4.20.11?		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

opsens_claude_belleville

34 Posts
Posted - 03 Aug 2005 :  15:35:32  Show Profile
Hi

I replace the old version 4.20.05 by the the latest version of GCX 4.20.11

The DHCP into the old version is working fine, but with the 4.20.11 version the DHCP acting strange

On the first boot (and all the other), Windows give me the following DHCP error : "DHCP was unable to obtain an IP address. If the netcard is removable then you can remove/reinsert it to have DHCP make another attempt to obtain an IP address for it. Otherwise, you can statically assign an address"

Like I said, this error wasnt on version 4.20.05

After each reboot I have the same error

I found a tricky way to have access to DHCP.
1- When I first got this message I disconnect the ethernet cable
2- Wait a little just to be sure
3- Reconnect the cable
4- Wait again
5- Force the DHCP to renew
Then I obtain the IP address and all other stuff

Thank you

Phil

akidder

1519 Posts
Posted - 03 Aug 2005 :  18:50:47  Show Profile  Email Poster
Thanks for the details, Phil. We'll investigate to see what's going on.
Go to Top of Page

akidder

1519 Posts
Posted - 09 Aug 2005 :  16:50:03  Show Profile  Email Poster
Yeah, it looks like there's an issue with DHCP in that build. We'll see what happened and correct it.

Thanks for letting us know.
Go to Top of Page

opsens_claude_belleville

34 Posts
Posted - 05 Oct 2005 :  15:44:21  Show Profile
Do you guys have plans to correct this issue ?
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000