All Forums
 Microsoft Windows CE
 General CE
 loading boot file from CF		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

SGV3000

4 Posts
Posted - 18 Aug 2006 :  14:40:31  Show Profile  Email Poster
Hello,
I am using a new windows CE image and trying to load the updated boot file adsload.rom from the CF disk. The first time, the CE image loads fine but on power cycle windows does not boot up. I believe, its an issue with the updated boot file not getting loaded appropriately. any advice on loading boot files from the CF will be helpful.
Thanks

akidder

1519 Posts
Posted - 18 Aug 2006 :  19:12:14  Show Profile  Email Poster
You may have programmed the wrong boot code for your product. If you reprogrammed the CE image, it may also be a problem with your registry file and the settings for the flash disk.

Let us know the product you're using and files you're trying to update. It might make sense to write us directly at support.us@eurotech.com so we can exchange files.

Output from the debug port during this process will also help.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000