All Forums
 Hardware
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 External BIOS on Catalyst Development System		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

hering53154

2 Posts
Posted - 14 Jan 2009 :  15:15:30  Show Profile
I would like to develop BIOS-less software for the Catalyst Module. I prefer to leave the installed BIOS unmodified so I can still boot Windows and Linux from the card. The Catalyst Development System User's Manual mentions an external BIOS and shows it on the Block Diagram, however, these is not enough information there to actually install and use a part. What parts are needed and where do they connect? How do I enable and disable the BIOS that's installed on the Catalyst module?

grenierm

133 Posts
Posted - 16 Jan 2009 :  16:11:05  Show Profile  Email Poster
Due to the specific nature of this request, we are discussing this issue via email.
Go to Top of Page

akidder

1519 Posts
Posted - 19 Jan 2009 :  14:35:24  Show Profile  Email Poster
Our current Catalyst offererings use the onboard BIOS. We can discuss BIOS and boot options for specific applications, but don't offer a BIOS-less Catalyst product at this time.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000