Eurotech Support Forums - IPV4 Driver Issue

All Forums

Microsoft Windows CE

CE Downloads and Documents

IPV4 Driver Issue

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

CEprogrammer

2 Posts

Posted - 27 Aug 2009 : 05:00:17

Hi, We have USB key with Windows CE 6.0 Pro R2 image(build No : 190122-21002)shipped along with the purchased Catalyst EC development kit. With "ipconfig" on the command prompt, it says "No IPVv4 Adapater found". Is it a driver issue and any idea how we coudl resolve this? Thanks.

beitman

63 Posts

Posted - 27 Aug 2009 : 09:56:38

Please check to see if the network adapters are enable in the BIOS. When booting press F2 to enter the BIOS menu, or remove the boot media and it will automatically enter the BIOS menu.

Got to Advanced, scroll down to PCI Express Root Port 1 and press Return. It should show the network adapter and .
Press ESC to return to the Advanced menu and repeat for Port2.

Bruce

grenierm

133 Posts

Posted - 27 Aug 2009 : 15:09:07

Hi CEProgrammer,

Thanks for your question.

The Intel 82574 Network Interface Controller on the Catalyst EC Carrier board is not supported with the Windows CE Image. We are currently working to integrate the Intel driver for operation with the Catalyst EC Carrier board and Windows CE.

Workaround: Use USB interface for loading files / connectivity using a USB 802.11 Wireless Thumb Drive

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.02 seconds.

Snitz Forums 2000