Eurotech Support Forums - INT-1410 Audio Matrix Sample C or C++ code

All Forums

Hardware

General Hardware, ADSmartIO, Digital I/O and A/Ds

INT-1410 Audio Matrix Sample C or C++ code

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

mkaranovic

1 Posts

Posted - 09 Feb 2010 : 20:48:39

Does exist sample C or C++ code for the INT-1410 Audio Matrix Board in the eXP or WinCe or Linux environment?

Edited by - mkaranovic on 10 Feb 2010 14:57:38

Russ-Eurotech

273 Posts

Posted - 16 Feb 2010 : 11:36:11

Hello Mirko,

have you already downloaded the following materials?

Datasheet:
http://www.eurotech.com/DLA/datasheets/Products_Eurotech/INT-1410_sf.pdf

Manual:
http://www.eurotech.com/DLA/Products_Eurotech/INT_1410/Manual//INT-1410_Manual.zip

Linux drivers:
http://www.eurotech.com/DLA/Products_Eurotech/INT_1410/Linux/Drivers/int-1410-linux26-driver-1.0.0.zip

Windows CE drivers:
http://www.eurotech.com/DLA/Products_Eurotech/INT_1410/WinCE/Drivers/int-1410-wince500-driver-1.3.0.zip

We are checking for examples, but it would help to start with the information above.

twhite

133 Posts

Posted - 17 Feb 2010 : 09:17:43

Here are the responses from our software group for the INT-1410:

1. Linux - We are told that once the driver has been installed you can just use the "alsa mixer" to control the module. However, we have not had any experience with this combination.

2. XPe - for Windows XPe there's no sample code for C/C++; actually we do not currently have a driver.

3. Windows CE - For Windows CE5.0, the driver installation package includes the source code of a simple command-line demo application.

We hope this helps you move forward with your development efforts.

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.03 seconds.

Snitz Forums 2000