All Forums
 Hardware
 Cables and Connectors
 Power adapter cable (Bitsy Personality Board)		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts
Posted - 30 May 2002 :  17:29:36  Show Profile  Email Poster
Power Adapter Cable 610111-80010

The 610111-80010 power adapter converts from the mini-DIN8 connector of off-the-shelf power supplies to the three-pin J16 power header used on the Bitsy Personality Board. It supplies 12V power to the DCIN and backlight power inputs.

The pinout for this adapter is as follows:
    Voltage   mini-DIN8   Molex 1x6 housing
     +12V         4              1,2
    COMMON       7,8              3

------------------
ADS Knowledge Base

Edited by akidder 6-Feb-2003: Correct common pin from 2 to 3.

bcarlson

4 Posts
Posted - 06 Feb 2003 :  17:23:40  Show Profile  Email Poster
Should COMMON terminate at Molex pin 3 instead of pin 2 ?
Go to Top of Page

akidder

1519 Posts
Posted - 06 Feb 2003 :  17:57:27  Show Profile  Email Poster
Good catch! I've corrected it.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000