All Forums
 Hardware
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 How much flash is installed on my system?
 Forum Locked
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts

Posted - 22 Jul 2002 :  14:45:34  Show Profile
Q. How can I tell how much flash is installed on my system?

ADS systems currently use StrataFlash, Intel's second generation flash memory system. Most products use two flash chips wired in parallel to create a 32-bit memory bank.

The flash comes in several packages; look for the "28F" to determine how much flash your system has:
  28F320 x 2 =  8M x 8 bits
28F640 x 2 = 16M x 8 bits
28F128 x 2 = 32M x 8 bits


------------------
ADS Knowledge Base

jesujoseph

3 Posts

Posted - 08 Oct 2003 :  23:37:36  Show Profile
I think my Flash chip is blown as well. The system reports that there are no flash memory on board. Can I use the K3 chips?
Go to Top of Page

akidder

1519 Posts

Posted - 10 Oct 2003 :  13:35:27  Show Profile
Thanks. Please see our response to your repair questions at topic 1191.
Go to Top of Page
  Topic  
 Forum Locked
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000