All Forums
 Hardware
 Displays
 Inverter control
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

jmonza

4 Posts

Posted - 04 Apr 2003 :  18:23:50  Show Profile  Email Poster
We are using a Bitsy Plus with Windows CE to drive a vehicle display system. We are currently trying to switch inverters from the LS520 to an Applied Concepts AC2-12-1128. Unfortunately, the AC2 inverter expects the BACKLIGHT PWM and BACKLIGHT ON control signals to be active high whereas the LS520 expects active low. The Bitsy is providing active low signals currently. How is this option changed on the Bitsy?

Thanks,
Jessica

Edited by - jmonza on 04 Apr 2003 18:25:20

akidder

1519 Posts

Posted - 04 Apr 2003 :  18:45:02  Show Profile  Email Poster
Hi Jessica. Here are a couple options available to you:
  1. Hardwired Solution
    The quickest is to hard-wire your backlight on for now. This sometimes is as simple as disconnecting the signals from the inverter. We describe this for the LS520 at topic 524.


  2. Startup App
    You can also write a quick app that initializes the backlight the way you need it. Backlight code for CE is posted at topic 451.


  3. Custom ADSmartIO Build
    Finally, we can create a custom build of the ADSmartIO firmware that initializes the backlight the way you need it (as we did for the Bitsy). Drop us a note if this is an option you want to pursue.

Let us know how we can help.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000