Eurotech Support Forums - AGX & BitsyX Linux 2.4.19 Kernel & Ramdisk (adsx4)

Eurotech Support Forums

Username:	Password:
Save Password
Forgot your Password?

All Forums

Embedded Linux

Linux Downloads and Documents

AGX & BitsyX Linux 2.4.19 Kernel & Ramdisk (adsx4)

Forum Locked

Printer Friendly

Author

Topic

jlackey

212 Posts

Posted - 25 Aug 2003 : 15:28:43

Linux 2.4.19-rmk7-pxa2-adsx4

This version

Only supports AGX and BitsyX boards.

Has a new touch screen driver that provides improved noise handling and better support for calibration. The new driver is compatible with the IPAQ touch screen driver supported in many embedded GUIs (e.g. OPIE, GPE). The new driver is not compatible with the default (microwindows) interface provided in the previous driver.

Does not support USB on the AGX. [Later versions do. -jlackey]

Important Warnings and Requirements

Do not use a connector board older than Rev A on the BitsyX.

To build the kernel, you must use a compiler that supports the Xscale CPU.
You can use the one we used to build the precompiled kernels provided below.
Download arm-2.95.3.tar.gz , untar it in /usr/local/ and add it to your path.
```
cd /usr/local
tar xzf arm-2.95.3.tar.gz
PATH=/usr/local/pxa/bin:$PATH
```

Kernel source and patches

linux-2.4.19.tar.gz (~32MB)
Download from ftp://ftp.kernel.org/pub/ and make a base directory.

mkdir -p /usr/local/src/2.4.19 (you can use a different directory)
cd /usr/local/src/2.4.19/
tar xzf linux-2.4.19.tar.gz

patch-2.4.19-rmk7.gz (~740kB)
Download from ftp://ftp.arm.linux.org.uk/pub/armlinux/kernel/v2.4/ and apply the patch.
Change to the linux directory and apply the patch using patch level "-p1".
```
cd linux
zcat patch-2.4.19-rmk7.gz | patch -p1
```

diff-2.4.19-rmk7-pxa2.gz (~250kB)
Download from ftp://ftp.arm.linux.org.uk/pub/armlinux/people/nico/ and apply the patch.
Remain in the linux directory and apply the patch using patch level "-p1".
```
cd linux
zcat diff-2.4.19-rmk7-pxa2.gz | patch -p1
```

diff-2.4.19-rmk7-pxa2-adsx4.gz (~230kB)
Remain in the linux directory and apply the patch using patch level "-p1".
```
zcat diff-2.4.19-rmk7-pxa2-adsx4.gz | patch -p1
```
If you have an AGX, you may also need to apply the diff-2.4.19-rmk7-pxa2-adsx4-agx-backlight-fix.gz patch (see below).

Ramdisk Image

ramdisk.gz

MD5

Precompiled Kernel Images

BitsyX zImage [MD5]
- LCD (Sharp LQ64D343, 640x480)
- Touch screen
- PS/2 Keyboard
- On-Board Flash (JFFS2)
- PCMCIA Interface (ATA Flash, NE2000 Network, & 802.11b Wireless Cards)
- CF Interface (requires CF connector board)
- On-Board Ethernet (requires Ethernet connector board)
- USB Host
- 3 Serials
- Power Management
- CPU Frequency and Voltage Scaling
- ADSmartIO
- AC97 Audio
- Real Time Clock

AGX zImage [MD5]
- LCD (Sharp LQ64D343, 640x480)
- Touch screen
- PS/2 Keyboard
- On-Board Flash (JFFS2)
- PCMCIA Interface (ATA Flash, NE2000 Network, & 802.11b Wireless Cards)
- On-Board Ethernet
- 3 Serials
- 8250 QuadUART
- Power Management
- CPU Frequency and Voltage Scaling
- ADSmartIO
- AC97 Audio
- Real Time Clock

jlackey

212 Posts

Posted - 25 Sep 2003 : 15:48:44

There is an update for the AGX that affects the backlight. To get this update, download and apply the following patch: diff-2.4.19-rmk7-pxa2-adsx4-agx-backlight-fix.gz.

The precompiled kernel image for the AGX has been replaced with a zImage that includes this update.

Topic

Forum Locked

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.03 seconds.

Snitz Forums 2000