All Forums
 Microsoft Windows CE
 General CE
 LSR_Framing_Error		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

Tim

39 Posts
Posted - 13 Feb 2004 :  12:35:02  Show Profile  Email Poster
From the Debug port I get

"Drop a byte on the floor Because of
LSR_Framing_Error"

and

"Drop a byte on the floor Because of
LSR_Overrun_Error"

What is this error message?

Thanx!

akidder

1519 Posts
Posted - 13 Feb 2004 :  12:42:00  Show Profile  Email Poster
These are error messages from the serial driver indicating that incoming data was lost. You should be able to trap overrun and data framing error events in your app. This might be related to the issue we're working on with you in topic 1368.
Go to Top of Page

Tim

39 Posts
Posted - 13 Feb 2004 :  16:48:25  Show Profile  Email Poster
When the debug port shows the LSR_xxx messages ReadFile returns a timeout. I have increased the timeout value with no change. I have tried to trap the errors using both ClearCommError and WaitCommEvent. Neither indicates an error. Any ideas on how to trap these errors?

I am running CE 3.28 from the build info...

Thanx!
Go to Top of Page

Tim

39 Posts
Posted - 13 Feb 2004 :  19:15:01  Show Profile  Email Poster
Problem solved - bad hardware connecting to the GMaster.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000