| Author |
Topic |
|
|
esavolle
31 Posts |
 Posted - 16 Mar 2004 : 07:58:15
|
Hi, we try to upgrade BitsyX from build 4.10.28 to 4.10.36.
Our system is BitsyX rev A with development board rev A.
The bootloader is 1.07.
The loading of .HWT, .REG and .BIN files succeeds.
But the booting stops after flash detection.
Here the log:
-Start Log-----------------------------------------------------
******* BitsyX Initialization*******
CPU ID = A0 PXA255
SDCLK[1] = MemClk
MemClk = 99.53 MHz
Run Mode = 4 * MemClk
Turbo Mode = Run Mode
Mode: RUN
Reading Flash ...(from 0x40004 to 0x409ab)
Reading Hardware Ta
Microsoft Windows CE Ethernet Boot Loader
Copyright (c) 2001 Microsoft Corporation
Copyright (c) 2001 Intel Corporation
Copyright (c) 2002~2003 ADS BitsyX Bootloader Ver (1.07 )
(Built at 18:22:15 on Jul 24 2003)
Detected Ethernet(SMC91C111)
CPLD Version = 0x7
DipSwitch = 0x3
BootSwitch = 0x8
ADSLOAD.ROM : Reading ... Writing...
Failed to load ADSLOAD.ROM from an ATA Flash Card.
ADSLOAD.HWT : Reading ... Writing...
Programming flash (this will also take a few seconds).
File Size = 2471(0x9A7) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0x9a7 bytes) .
Writing Flash...(from 0x40004 to 0x409ab).
Compare Memory with Flash, Successfully Done !!!
ADSLOAD.REG : Reading ... Writing...
Programming flash (this will also take a few seconds).
File Size = 3986(0xF92) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0xf92 bytes) .
Writing Flash...(from 0x80004 to 0x80f96).
Compare Memory with Flash, Successfully Done !!!
ADSLOAD.EXE : Reading ... Writing...
Failed to load ADSLOAD.EXE from an ATA Flash Card.
ADSLOAD.BMP : Reading ... Writing...
Failed to load ADSLOAD.BMP from an ATA Flash Card.
NK.BIN : Reading ... Writing...
Programming flash (this will also take a few minutes).
File Size = 16438888(0xFAD668) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0xfad668 bytes) .
Writing Flash Header Size...(0x800b8000 bytes) .
Writing Flash...(from 0x200008 to 0x011ad670).
Compare Memory with Flash, Successfully Done !!!
RegBackup : Erasing...
Reading Flash ...(from 0x40004 to 0x409ab)
Reading Hardware Table(ADSLOAD.HWT) from Flash.
Booting from Flash.
Reading Flash ...(from 0x200008 to 0x011ad670)
CE starts From DRAM(0x800b8000)
Load HWT (Kernel)
Windows CE Kernel for ARM (Thumb Enabled) Built on Feb 12 2003 at 15:36:08
ProcessorType=02d0 Revision=6
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800
Registry area is blank.
Sp=ffffc7d0
FlashFX Disk Detected: Ver 5.10 (Build 492)
-End Log-------------------------------------------------------
When we reload 4.10.28 build, it works.
Here the log.
-Start Log-----------------------------------------------------
******* BitsyX Initialization*******
CPU ID = A0 PXA255
SDCLK[1] = MemClk
MemClk = 99.53 MHz
Run Mode = 4 * MemClk
Turbo Mode = Run Mode
Mode: RUN
Reading Flash ...(from 0x40004 to 0x409ab)
Reading Hardware Ta
Microsoft Windows CE Ethernet Boot Loader
Copyright (c) 2001 Microsoft Corporation
Copyright (c) 2001 Intel Corporation
Copyright (c) 2002~2003 ADS BitsyX Bootloader Ver (1.07 )
(Built at 18:22:15 on Jul 24 2003)
Detected Ethernet(SMC91C111)
CPLD Version = 0x7
DipSwitch = 0x3
BootSwitch = 0x8
ADSLOAD.ROM : Reading ... Writing...
Failed to load ADSLOAD.ROM from an ATA Flash Card.
ADSLOAD.HWT : Reading ... Writing...
Programming flash (this will also take a few seconds).
File Size = 2471(0x9A7) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0x9a7 bytes) .
Writing Flash...(from 0x40004 to 0x409ab).
Compare Memory with Flash, Successfully Done !!!
ADSLOAD.REG : Reading ... Writing...
Programming flash (this will also take a few seconds).
File Size = 3986(0xF92) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0xf92 bytes) .
Writing Flash...(from 0x80004 to 0x80f96).
Compare Memory with Flash, Successfully Done !!!
ADSLOAD.EXE : Reading ... Writing...
Failed to load ADSLOAD.EXE from an ATA Flash Card.
ADSLOAD.BMP : Reading ... Writing...
Failed to load ADSLOAD.BMP from an ATA Flash Card.
NK.BIN : Reading ... Writing...
Programming flash (this will also take a few minutes).
File Size = 16598312(0xFD4528) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0xfd4528 bytes) .
Writing Flash Header Size...(0x800b8000 bytes) .
Writing Flash...(from 0x200008 to 0x011d4530).
Compare Memory with Flash, Successfully Done !!!
RegBackup : Erasing...
Reading Flash ...(from 0x40004 to 0x409ab)
Reading Hardware Table(ADSLOAD.HWT) from Flash.
Booting from Flash.
Reading Flash ...(from 0x200008 to 0x011d4530)
CE starts From DRAM(0x800b800
Windows CE Kernel for ARM (Thumb Enabled) Built on Feb 12 2003 at 15:36:08
ProcessorType=02d0 Revision=6
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800
Registry area is blank.
Sp=ffffc7d0
FlashFX Disk Detected: Ver 5.10 (Build 492)
Ethernet Detected : SMC91C111.
Scanning Installed Providers
Installing Layered Providers
Installed over Windows C
E MS Tcpip [UDP/IP].
Installed over Windows CE MS Tcpip [UDP/IP].
Installed over W
indows CE MS Tcpip [TCP/IP].
Installed over Windows CE MS Tcpip [TCP/IP].
Can't Re
order under CEPreparing To Reoder Installed Chains
SMARTIO Detected : PartType=0x8535 Firmware=0x0010 Revision=2
SMARTIO : SerialClockRate=10 KBits/S(0xa7).
Microsoft Windows CE Ver. 4.10 (build 908)
BitsyX Windows CE Ver.(4.10.28)
-End Log-------------------------------------------------------
It stops during SMC detection.
Is it the cause ?
Thanks for any help
eric
|
|
|
Susan
123 Posts |
Posted - 16 Mar 2004 : 08:29:14
|
| When we went to 4.10.36, we also used 1.10 ROM. Load ROM first. Restart the boot process, then load the image. |
 |
|
| |
Topic |
|
|
|
All Forums
Microsoft Windows CE
Troubleshooting when upgrading BitsyX to 4.10.36
Forum Locked
Printer Friendly