Eurotech Support Forums - Buying MAC addresses

All Forums

Hardware

Ethernet, IR, Serial, CAN and high speed data

Buying MAC addresses

Forum Locked

Topic Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

akidder

1519 Posts

Posted - 03 Jun 2004 : 16:11:13

Buying MAC Addresses

If you are developing a product that has an Ethernet controller on it (like the Bitsy Personality Board), you're going to need to program each board with a MAC (Media Access Control) address. MAC addresses uniquely identify each Ethernet network device.

It's cheap and easy to purchase your own block of MAC addresses (US$550 for 4096 addresses). See the following links for further details:

About.com article about MAC addresses
http://compnetworking.about.com/library/weekly/aa062202a.htm

IEEE order form for a block of MAC addresses
http://www.standards.ieee.org/regauth/oui/pilot-ind.html

Wikipedia on MAC addresses
http://en.wikipedia.org/wiki/Mac_address

Edited 24-Nov-08 by akidder: Added wikipedia link.

akidder

1519 Posts

Posted - 24 Nov 2008 : 10:30:47

Pre-Programmed Parts

In volume production, it's not usually practical or reliable to program parts manually. Eurotech purchases pre-programmed parts for its assemblies.

If you have designed a product with one of our products and could make use of pre-programmed parts, contact us with the details of your application and we will be glad to help.

Topic

Forum Locked

Topic Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.02 seconds.

Snitz Forums 2000