All Forums
 Microsoft Windows CE
 CE Drivers
 repeated PS/2 keyboard chars on BitsyX
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

chief

6 Posts

Posted - 03 Nov 2006 :  09:23:33  Show Profile  Email Poster
We are using the BitsyX with WinCE build 4.20.17 and SmartIO 3.1, and when using a PS2 keyboard occasionally the keys act like they are 'stuck', repeating the keystroke until I hit another key. I cannot reproduce this behavior at will, but I was wondering if anyone has seen this behavior or has any suggestion as to what might be causing this. I am going to update to the latest WinCE build (4.20.38 ?) and see if that fixes the problem.

akidder

1519 Posts

Posted - 03 Nov 2006 :  09:44:35  Show Profile  Email Poster

My bet is that you are probably using ADSmartIO rev 3 (reports something like "0010 rev 3" on the debug port during boot), which should be fine.

It looks like BitsyX build 4.20.25 has a fix for interpreting the F7 key, which suggests that we did some work on the ADSmartIO driver. Updating to 4.20.38 is probably a good move.

If you can find a way to reliably reproduce the issue, it will help. Since this is a CE issue, I have moved your post to the CE Drivers forum.

Let us know how we can help.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000