Eurotech Support Forums

All Forums

Microsoft Windows CE

General CE

adsload.reg

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

masseyi

20 Posts

Posted - 29 Jan 2007 : 03:52:07

Hi,
I've modified my adsload.reg on the latest bitsyxb board running wince 5.0. Problem I am getting is none of this is getting put into the registry at boot up. Any reason for this?

Here is my adsload.reg file :

;-----------------------------------------------------
; ADS WinCE Registry File for BitsyXB
;
;- 02Feb2006 00118-07001 Nhat
;- Created for 64MB DRAM, LQ64D343 TFT LCD
;-----------------------------------------------------

[HKEY_LOCAL_MACHINE\Drivers\Display\Intel]
"EnableMouseCursor"=dword:1

[HKEY_LOCAL_MACHINE\Drivers\Display\Intel]
"CxScreen"=dword:280 ; 640
"CyScreen"=dword:1E0 ; 480
;; "CxScreen"=dword:320 ; 800
;; "CyScreen"=dword:258 ; 600

;; "Bpp"=dword:8
"Bpp"=dword:10

; @CESYSGEN IF CE_MODULES_POINTER
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:20

[HKEY_LOCAL_MACHINE\Drivers\TOUCH]
"SamplePeriod"=dword:8500
"DeltaXCoordTolerance"=dword:10
"DeltaYCoordTolerance"=dword:10
"LeadingReadsToIgnore"=dword:5
"ReadsBeforePenDown"=dword:1
"SamplesPerPoint"=dword:8;4
"ReadsPerSample"=dword:4;4
"ZThreshold"=dword:96;64; not used by the driver, this is an error
"InterSampleDelay"=dword:0
"InterruptReenableDelay"=dword:11;a
"SerialClockRate"=dword:c;9;10;6;8
"Priority256"=dword:5f
"NoTouchScreen"=dword:0
"ShowDebug"=dword:0
"MinCalibrationPointCount"=dword:10

;[HKEY_LOCAL_MACHINE\Platform\Backlight]
; "StateForOn"=dword:0
; "BacklightRunLevel"=dword:FF
; "BacklightIdleLevel"=dword:80
"BLightLevel4On"=dword:00
"BLightLevel4Off"=dword:A0 ; brightness level when "off"

[HKEY_CURRENT_USER\ControlPanel\Backlight]
"BatteryTimeout"=dword:3C ; seconds of inactivity before turning off backlight
"UseBattery"=dword:0 ; 1=use BatteryTimeout when on battery
"ACTimeout"=dword:220 ; seconds of inactivity before turning off backlight
"UseExt"=dword:0 ; 1=use ACTimeout when on "AC" power

Thanks,
Steve

jnosek

3 Posts

Posted - 29 Jan 2007 : 11:08:59

Steve,

I believe this is a conversation that could best be solved by e-mailing us at the support team e-mail address: support.us@eurotech.com.

Please include this registry information and a copy of the debug output from when your board boots.

Jack

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.03 seconds.

Snitz Forums 2000