All Forums
 Hardware
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 BitsyX - FlashFX Assertion Failure on boot
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

quantum-services

1 Posts

Posted - 16 Mar 2009 :  09:12:04  Show Profile  Email Poster
We have over 500 BitsyX based devices in a production environment. In the last 2 months we've had 2 devices fail with the exact same problem. The unit turns on but will not boot completely.

Watching the bootup messages via the serial port, the device stops booting as the following text is received:

Assertion failure at 401.834

Re-flashing the devices does not fix the problem. What does this error mean and how can the problem be fixed?

Here is the complete boot log:
Microsoft Windows CE Ethernet Boot Loader
Copyright (c) 2001 Microsoft Corporation
Copyright (c) 2001 Intel Corporation
Copyright (c) 2002~2003 ADS BitsyX Bootloader Ver (1.12 )
(Built at 16:18:09 on Dec 16 2004)

Reading Flash ...(from 0x100004 to 0x10458e)
CPLD Version = 0x9
DipSwitch = 0x3
BootSwitch = 0x8

Booting from Flash.
Reading Flash ...(from 0x200008 to 0x015e7dc0)

CE starts From DRAM(0x800
Windows CE Kernel for ARM (Thumb Enabled) Built on May 3 2005 at 14:03:22
ProcessorType=02d0 Revision=6
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800b9170
Sp=ffffc7cc
Datalight FlashFX Pro v1.11 Build 856
Copyright (c) 1993-2004 Datalight, Inc.
Patents: US#5860082, US#6260156.
FFX: B9900000 = CreateStaticMapping( 1600000, A00000 )
FlashFX SDK License ID #5B2C08D8
Created Thread 23ED1F6E
Datalight Reliance v1.13.0337
Copyright (c) 2003 - 2005 Datalight, Inc.
Registered to #6A48B493
FlashFX v1.11.856: Assertion failure at 401.834

Thanks.

sblary

6 Posts

Posted - 09 Jun 2011 :  11:58:29  Show Profile  Email Poster
We have a BitsyXb giving the same indication "FlashFX v1.11.856: Assertion failure at 401.834" Any suggestions for resolution of issue and preservation of customer data stored on the FlashFX Disk are appreciated!

Kind regards,
Steve
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000