Author |
Topic |
|
twhite
133 Posts |
Posted - 14 Jan 2010 : 14:02:30
|
Catalyst FX User Manual (rev A 2.1 MB )
The Catalyst FX is a low-power embedded computer system offering extensive I/O, communication, and multimedia capabilities that can be easily customized to meet your application requirements. It is based on the Catalyst Module, which integrates with a carrier board, optional expansion board, and supporting peripheral devices to provide a total production solution. With the Catalyst FX, you can quickly and easily create a system loaded with your application software that precisely meets your requirements.
Several options are available, allowing you to choose the hardware based on your specifications. An expansion connector supports add-in boards, expanding the multimedia and I/O capabilities of the Catalyst FX and allowing customization for your application.
The Catalyst FX is available with Windows CE, Windows Embedded Standard, and Wind River Linux 3.0 operating systems. Support is also available for the Java Virtual Machine and Eurotech’s Everyware™ Software Framework, which offers an easy-to-use, Java-based development environment that minimizes time to market and allows for easy portability for future expansion.
Processor - Intel® Atom™ Z5xxP Processor at 1.1GHz (Catalyst Module XL) - Intel System Controller Hub SCH US15WP - 512 MB DDR-2 DRAM - On-module system BIOS PROM - Battery-backed real-time clock Audio Interface - Mono-microphone input - Stereo line input - Stereo line output - Sony/Philips Digital Interconnect Format (S/PDIF)output Operating System Software and Middleware - Windows Embedded Standard - Wind River Linux 3.0 - Eurotech Everyware® Software Framework Communications and I/O - One CompactFlash® card slot - 4GB memory card (SD slot option) - One 2.5” SATA interface - Five USB 2.0 host ports (Low/High/Full speeds) - o Two general purpose ports - o Three locking ports - One gigabit Ethernet port - One serial port (EIA-232) - GPS receiver (u-blox LEA-5A-0-003) - Expansion connector with display option (LVDS or VGA) - Eight software controllable dual-color LEDs ...
Related topics: Catalyst FX Development Kit Quick Start Guides |
|
akidder
1519 Posts |
Posted - 04 Aug 2010 : 12:57:43
|
Current Limits for 5V PWR_OUTPUT on J29
The 5V PWR_OUTPUT on J29 connects directly to the Catalyst FX 5V power plane with no current limiting. If there is any chance that the connected peripheral might experience over-current conditions or it will draw significant in-rush current, include a current limiting device in your design.
The output is rated for 200 mA, with an absolute maximum of 1000 mA.
If the 5V power plane is drawn down by excessive external loads, the system may reset or experience other undesirable behaviour.
|
|
|
|
Topic |
|
|
|