All Forums
 Hardware
 Ethernet, IR, Serial, CAN and high speed data
 Driver for COM-1274 CAN board in xPC Target
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

qiquan

5 Posts

Posted - 24 Mar 2010 :  01:36:07  Show Profile
Since there is no support in xPC Target of matlab, I want to make the driver for my CAN board com-1274. Has anyone done this before? Could you give me some advice? Thanks in advance.

FlavioSuligoi

7 Posts

Posted - 24 Mar 2010 :  03:12:38  Show Profile  Email Poster
Hi qiquan,

I use socketcan for the COM-1274 CAN device. See the driver sourfe code for the Intel 82527 in:

http://developer.berlios.de/projects/socketcan/

Regards,

Flavio
Go to Top of Page

qiquan

5 Posts

Posted - 25 Mar 2010 :  08:49:18  Show Profile
Hi Flavio,

Thanks for your advice.
The file "How to use SocketCAN" on the website of Eurotech cannot be downloaded successfully.
Is there any information for how to use the SocketCAN?
It seems that the SocketCAN is developed for linux. Is it okay for writing driver in xPC Target of Matlab?
Thanks very much

Regards,
Qiquan
Go to Top of Page

FlavioSuligoi

7 Posts

Posted - 25 Mar 2010 :  09:22:32  Show Profile  Email Poster
Hi quiquan,

try the following link for a socketcan readme:

http://www.eurotech.com/DLA/Products_Eurotech/COM_1274/Linux/Drivers/Readme

reagrds,

Flavio
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000