All Forums
 Hardware
 Cables and Connectors
 Activesync USB connection to bitsyXB
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

adal01

11 Posts

Posted - 27 Apr 2010 :  13:59:31  Show Profile  Email Poster
I have a BitsyXB system runnning windows CE 5.0. I'm also using the personality board with 3 com ports and one USB and NO ethernet.

My development platform is Visual Studio 2005, and I'm using Activesync version 3.7.

I have been able to make a connection to the BitsyXB board using serial communication on Com1 and ActiveSync.

However, I can't get ActiveSync to communicate with the BitsyEB board when I use the USB connection option.

I have the "PC Connection" applet in the control panel on the BitsyXB set up to use USB and I have ActiveSync on the development system set to use USB but I haven't been able to get it to work.

Any help on this issue would be great.

Thanks in advance
Allen

grenierm

133 Posts

Posted - 27 Apr 2010 :  14:05:16  Show Profile  Email Poster
Allen:

Which version of CE 5.0 are you running on the BitsyXb? You can elicit this information from the debug output, near the bottom.
Go to Top of Page

beitman

63 Posts

Posted - 27 Apr 2010 :  14:08:08  Show Profile  Email Poster
Allen is using 5.00.39 Pro
Go to Top of Page

adal01

11 Posts

Posted - 27 Apr 2010 :  14:30:49  Show Profile  Email Poster
Here is a little more information from debug output of the BitsyXB board.

Windows CE Ver.(5.00.39 BX270_Pro_HIVE)
Bootloader Version 2.12
ADSLOAD.HWT Version 0x00000000
ADSLOAD.REG Version Not Available
CPLD Version 6
AVR Version 10 6


FlashFX Disk Size (5MB) OK


Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Sep 23
2008 17:30:08
Unlocking FLASH blocks.
INFO: LoadEBootCFG: Using default configuration for all blocks

Resetting factory default configuration...

Resetting MemCfg oconfiguration...
DeleteSysHiveFile 33

Splash Display ADSLOAD.BMP.
ADSLOAD.BMP File Format OK.
BitsPerPixel is 16.
Display Module is the default inside CPU.


Copyright (c) 2002-2008 EuroTech Inc.

================================================
BitsyXb Platform - Bootloader
------------------------------------------------
* Version 2.12
* SDRAM: 64 MB
* Flash: 32 MB
* Type: Retail
* Built on Sep 23 2008 at 17:35:37
* CPLD Rev: 6
* DIP SW: 1=off, 2=off
* Boot Option: SEALED BOX UPGRADE
* Processor clock (turbo): 512 MHz
==================================================

System ready!
Preparing for download...
PC Cards Inserted: 0
- ATA disk NOT found.

Found resident NK image in FLASH:
- Copying to RAM... Done.

Jumping to image at 0xA0200000(P):0x80200000(V)...


Windows CE Kernel for ARM (Thumb Enabled) Built on Feb 8 2007 at 23:36:51
ProcessorType=0411 Revision=8
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80207ad4
System DRAM (MB) - Total:64 Extension:None
Sp=ffffc7cc
Datalight FlashFX Pro v1.11 Build 856
Copyright (c) 1993-2004 Datalight, Inc.
Patents: US#5860082, US#6260156.
FFX: B1A00000 = CreateStaticMapping( 01A00000, 00600000 )
FlashFX SDK License ID #5B2C08D8
Created Thread 43C3EFD6
Datalight Reliance v1.13.0337
Copyright (c) 2003 - 2005 Datalight, Inc.
Registered to #6A48B493
Initializing Debug Log Driver...
Failed
Initializing FLASH Driver... FSHDRV: B0000000 = CreateStaticMapping( 0, 2000000
)
MfgCode 890089
ok
Initializing ADSLOAD.REG Parsing driver... ok (192ms)
Initializing POWER Driver... ok
Initializing Ethernet Driver... Failed
LAN91C111_MiniportInitialize() - Unsupported Media
Initializing SMARTIO Driver...
SMARTIO Detected : PartType=0x8535 Firmware=0x0010 Revision=6
SMARTIO : SerialClockRate=10 KBits/S(0xa7).
ok
Initializing Serial(driver version support IR)... UART0 ok. (107ms)
Initializing Serial(driver version support IR)... UART2 ok. (107ms)
Initializing Serial(driver version support IR)... UART1 oInitializing USB HCD...
Ok
Initializing USB Client... Ok
Initializing I2C driver v 1.1...ok (1ms)
USB HCD wakeUpThread: Read Registry setting error, use default value.
Initializing Digital I/O Driver v. 2.2...ok (5ms)
Initializing WAV device... Ok
Initializing SDHC Driver... Ok
Initializing PXA25x Display Driver (v1.2)... Ok (364ms)
Initializing Touch Panel driver v 1.6... Ok (5ms)
Go to Top of Page

adal01

11 Posts

Posted - 27 Apr 2010 :  14:37:17  Show Profile  Email Poster
Just wanted to mention that I am running Activesync 3.7 and not the latest 4.5 since I think ActiveSync 4.5 was causing me not to be able to connect via Serial Com1 from my development system to the BitsyXB board.
Go to Top of Page

adal01

11 Posts

Posted - 27 Apr 2010 :  14:45:02  Show Profile  Email Poster
Just a heads up I tried connecting to the BitsyXB board via USB with ActiveSync 4.5 instead of using ActiveSync 3.7.
I was still unable to make a connection.

Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000