All Forums
 Hardware
 Ethernet, IR, Serial, CAN and high speed data
 Ethernet problem with BitsyXB (versus BitsyX)		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

msi

10 Posts
Posted - 23 Aug 2010 :  16:17:42  Show Profile
We have designed a daughter board for the BitsyX Board. When I plug the BitsyX board to it, my Ethernet works just fine. However, when I plug the BitsyXB board, my Ethernet does not work. So basically:


1. The network does not work when using the BitsyXB.
2. We notice that the boot message actually shows that there is an error with the Network (when using BitsyXB of course), here is a extract of the message:

************Start ofExtract from Hyperterminal ********************************
Initializing Debug Log Driver...Disabled in registry
Initializing FLASH Driver... ok
Initializing ADSLOAD.REG Parsing driver... ok (222ms)
Initializing POWER Driver... ok
Initializing Ethernet Driver... Failed
LAN91C111_MiniportInitialize() - Unsupported Media
Initializing Serial(driver version support IR)... UART2 ok. (106ms)
Initializing Serial(driver version support IR)... UART0 ok. (107ms)
Initializing SMARTIO Driver...
SMARTIO Detected : PartType=0x8535 Firmware=0x0010 Revision=6
SMARTIO : SerialClockRate=10 KBits/S(0xa7).
ok
Initializing Serial(driver version support IR)... UART1 oInitializing USB HCD...
Ok
************End Extract from Hyperterminal **********************


Any help would be greatly appriciated.

--Rafael A.Longo

twhite

133 Posts
Posted - 23 Aug 2010 :  16:32:35  Show Profile  Email Poster
Rafael,

Could you please let us know the version of WinCE you are using?
Does this error happen every time?
Does this error happen on multiple boards? If yes, what % of boards?

Thank you for the extra information!
Go to Top of Page

msi

10 Posts
Posted - 23 Aug 2010 :  19:16:47  Show Profile
1. Windows CE Version 5.00.51
2. Yes it happens every time.
3. I only have 2 BitsyXB boards for the moment, and it happens on both.

If you have more question please don't hesitate your help is really appreciated.
Go to Top of Page

msi

10 Posts
Posted - 30 Aug 2010 :  09:39:59  Show Profile
Can anyone help me with this issue?
Go to Top of Page

beitman

63 Posts
Posted - 30 Aug 2010 :  10:58:48  Show Profile  Email Poster
Since this problem is specific to MSI's custom connector board, I am taking the discussion offline.

MSI, you should have an email from me about this problem.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000