| Author |
Topic |
|
|
tempo
26 Posts |
 Posted - 17 Apr 2002 : 13:46:36
|
I have successfully copied my files to the graphics master. But when i reset (dip 3 on others off) i get a black screen on the lcd and the standard boot menu on my hyperterminal connection.
Where am I going wrong?
Processor Initialization Table read.
Determining boot cause.
Reset detected.
Starting monitor.
C0037FFC
Waiting for timers to stabilize.
** Graphics Master Loader initializing(0x4). **
ADS Graphics Master Rom Ver. 1.79 (DRAM : 32 MB, CL:3)
(Build at 12:33:10 on Nov 28 2001)
Finding PCMCIA cards.
Found 1 PCMCIA cards in system.
Reading hardware register values from ATA flash PC card.
You set the switch(Bit 3) for reading files from ATA Card
and Those files will be burn into flash.
ADSLOAD.BMP : Reading ... Writing...
Loader can't find the file (ADSLOAD.BMP)
Failed to load ADSLOAD.BMP from an ATA flash PC card.
ADSLOAD.HWT : Reading ... Writing...
Programming flash (this will also take a few minutes).
File Size = 3833(0xef9) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0xef9 bytes) .
Writing Flash...(from 0x40004 to 0x40efd).
Compare Memory with Flash, Successfully Done !!!
ADSLOAD.REG : Reading ... Writing...
Programming flash (this will also take a few minutes).
File Size = 19908(0x4dc4) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0x4dc4 bytes) .
Writing Flash...(from 0x80004 to 0x84dc8).
Compare Memory with Flash, Successfully Done !!!
ADSLOAD.EXE : Reading ... Writing...
Loader can't find the file (ADSLOAD.EXE)
Failed to load ADSLOAD.EXE from an ATA flash PC card.
NKLOAD.BIN : Reading ... Writing...
Programming flash (this will also take a few minutes).
File Size = 13563916(0xcef80c) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0xcef80c bytes) .
Writing Flash...(from 0x100004 to 0xdef810).
Compare Memory with Flash, Successfully Done !!!
Reading Flash Header Size...(0xef9 bytes)
Reading Flash ...(from 0x40004 to 0x40efd)
Reading Hardware Table values from Flash.
This is Color, 8 Bit, Active Panel.(Width = 640, Height = 480)
8 BPP Color.
*********************************************************************
* ADS Graphics Master Loader *
*********************************************************************
1] Display Register
2] Set Register
3] Dump Memory
4] Set Memory
5] Erase the block of Flash.
6] Display Files in the Flash.
7] Move an Image from Flash to RAM
8] Display Ethernet Information
9] Set Up Ethernet Information
0] Download Image Via Ethernet(ESHELL)
A] Download over Serial (XModem)
B] Execute HWT(Hardware Table) from Flash
C] Start Windows CE @ c8800000
D] Fill Memory with a Pattern
E] Set MAC(Media Access Control) Address
>>Processor Initialization Table read.
Determining boot cause.
Reset detected.
Starting monitor.
C0037FFC
Waiting for timers to stabilize.
** Graphics Master Loader initializing(0x1). **
ADS Graphics Master Rom Ver. 1.79 (DRAM : 32 MB, CL:3)
(Build at 12:33:10 on Nov 28 2001)
Finding PCMCIA cards.
Reading Flash Header Size...(0xef9 bytes)
Reading Flash ...(from 0x40004 to 0x40efd)
Reading Hardware Table values from Flash.
*********************************************************************
* ADS Graphics Master Loader *
*********************************************************************
1] Display Register
2] Set Register
3] Dump Memory
4] Set Memory
5] Erase the block of Flash.
6] Display Files in the Flash.
7] Move an Image from Flash to RAM
8] Display Ethernet Information
9] Set Up Ethernet Information
0] Download Image Via Ethernet(ESHELL)
A] Download over Serial (XModem)
B] Execute HWT(Hardware Table) from Flash
C] Start Windows CE @ c8800000
D] Fill Memory with a Pattern
E] Set MAC(Media Access Control) Address
{ Post trimmed for clarity } |
|
|
akidder
1519 Posts |
Posted - 17 Apr 2002 : 14:31:59
|
Thanks for the detailed debug output; it's quite helpful.
A couple thoughts:
- Try setting your DIP switches to 1 and 3 ON, others OFF. It looks like only switch 1 is ON ("...Loader initializing(0x1)").
- Try loading the latest REG and HWT files for the Graphics Master. This is the most common source of boot problems when reloading files.
Please let us know how it goes.
-----------------------
Drew Kidder
ADS Technology Transfer |
 |
|
|
tempo
26 Posts |
Posted - 19 Apr 2002 : 14:38:17
|
| The Developers guide says to set dip switch one on and all others off. Is this incorrect? After i set both dip switches (1 & 3) everything was fine. Thanks for your help |
|
|
|
madav
15 Posts |
Posted - 14 May 2003 : 14:42:05
|
I am using a Bitsy board + CE .NET, Irrespective of which positions I have my DIP switches, I am always getting the debug menu. I thought that it should be a hardware problem and have tried using two other bitsy boards, but still I am getting the debug menu when I bootup.
Is there an entry in the registers to control this or is it a purely Hardware mechanism.
Thanks |
|
|
|
akidder
1519 Posts |
Posted - 14 May 2003 : 15:01:34
|
Hi Madav. Can you email us the output from the debug port from the time you first power up the system? That'll help us see where the issue is.
Thanks! |
|
|
|
madav
15 Posts |
Posted - 05 Jun 2003 : 16:38:53
|
I have able to over come my prebvious problem. There was an error in the Hardware table
Thanks |
|
|
| |
Topic |
|
All Forums
Microsoft Windows CE
Cannot get image to boot once loaded
Forum Locked
Printer Friendly