| Author |
Topic |
|
|
ctacke
877 Posts |
 Posted - 24 Jun 2002 : 18:19:00
|
This topic has been locked for archival purposes, and the information should be considered "stale".
For CE.NET releases for the Graphics Master, visit our CE Image Selector page
We now have a release version of a CE.NET image for the Graphics Master!
This is a 12MB build and includes IE 5.0.
Download the image here (12 MB zip)
-----------------
Chris Tacke, eMVP
Applied Data Support |
|
|
ctacke
877 Posts |
Posted - 28 Jun 2002 : 11:56:29
|
Note:
The FlashFX disk is not available in this build. While it does show up in Explorer, you cannot write to or read from the FlashFX Disk partition.
-----------------
Chris Tacke, eMVP
Applied Data Support |
 |
|
|
bruces
6 Posts |
Posted - 12 Jul 2002 : 09:32:51
|
Chris, I notice that there is a beta SDK in another location. Should I continue to use that?
quote:
We now have a release version of a CE.NET image for the Graphics Master!
|
|
|
|
ctacke
877 Posts |
Posted - 12 Jul 2002 : 09:34:02
|
If you're doing .NET development (C#, VB.NET), the SDK isn't necessary - it's for eVC 4.0.
-----------------
Chris Tacke, eMVP
Applied Data Support |
|
|
|
KenWoodland
2 Posts |
Posted - 12 Jul 2002 : 10:50:10
|
Have you tested if Visual Basic .NET works? I am trying to run the SmartDeviceApplication with the default Form1 window and it works just fine on the host, on the Windows CE emulation but does not run on the Graphics Master with .NET kernel. It connects, loads and install the cab file and copies over the .exe, but when it runs the .exe, it just returns without putting up the window. If you run the .exe by hand it does the same thing.
Am I missing something? It looks like it should work. Is there something else that needs to be installed?
Please get back to me as soon as possible. We need this to finish debugging our Demo.
|
|
|
|
ctacke
877 Posts |
Posted - 12 Jul 2002 : 11:05:20
|
Make sure that your device has enough storage space allocated to hold the framework and your app (Control Panel | System | Memory). I've found that if it's on the threshold, the framework will appear to install properly - meaning no errors are reported - but when I try to run the app, nothing happens.
-----------------
Chris Tacke, eMVP
Applied Data Support |
|
|
|
KenWoodland
2 Posts |
Posted - 18 Jul 2002 : 10:02:54
|
Is there way to setup more memory for storage in the registry, so I do not have to bring up the control panel every time I boot?
-Ken Woodland
|
|
|
|
ctacke
877 Posts |
Posted - 18 Jul 2002 : 10:09:38
|
Sure. Modify your ADSLOAD.REG file with the following key:
;-----------------------------------------------------
; Set Storage memory and Program memory
; Page size is 4096 bytes. Default Value is 256 pages for Object Store.
; If you set 256 pages(dword:100), the storage memory(object store) is
; 256 * 4096 = 1MB. The rest of available memory becomes program memory.
;
; dword:40 leaves 256k for storage
;-----------------------------------------------------
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\MemoryConfig]
"ObjectStorePages"=dword:200
-----------------
Chris Tacke, eMVP
Applied Data Support |
|
|
|
tempo
26 Posts |
Posted - 13 Nov 2002 : 14:25:08
|
I tested the GM.net with a PS2 mouse (microsoft intellimouse), USB mouse, PS2 Keyboard (dell standard 104) and USB compound device (keyboard / hub - Microsoft Internet Keyboard). I could get only the PS2 keyboard to work. Can you verify this?
Thanks
Paul Saunders -Tempo |
|
|
|
tempo
26 Posts |
Posted - 13 Nov 2002 : 14:26:03
|
| If I choose suspend from the start menu the GM white screens and requires a hard reset. |
|
|
|
tempo
26 Posts |
Posted - 13 Nov 2002 : 17:46:00
|
I managed to get the USB mouse and PS2 mouse working (with HWT change). However USB / Compound keyboards still do not work.
Any ideas?
Thanks
Paul Saunders - Tempo |
|
|
|
jbaik
22 Posts |
Posted - 13 Nov 2002 : 18:08:41
|
You'll see white LCD Screen during the Sleep.
When you short J1 Jumper right next IrDA Port, System will wake up.
|
|
|
|
jbaik
22 Posts |
Posted - 13 Nov 2002 : 18:10:49
|
Paul
We're testing several different USB keyboards now.
We found some bugs(???) on USB HID Driver from MS.
You can try your USB keyboard with next image.
Thanks
quote:
[i]Originally posted by tempo[/i]
[br]I managed to get the USB mouse and PS2 mouse working (with HWT change). However USB / Compound keyboards still do not work.
Any ideas?
Thanks
Paul Saunders - Tempo
|
|
|
|
jbaik
22 Posts |
Posted - 13 Nov 2002 : 18:12:29
|
On CE.NET 4.1, you can read/write FlashFX Disk.
quote:
[i]Originally posted by ctacke[/i]
[br]Note:
The FlashFX disk is not available in this build. While it does show up in Explorer, you cannot write to or read from the FlashFX Disk partition.
-----------------
Chris Tacke, eMVP
Applied Data Support
|
|
|
|
ctacke
877 Posts |
Posted - 14 Nov 2002 : 00:40:27
|
| The 4.1 image John alludes to can be downloaded from our image selector page. There is also a new SDK for this image. The image downloads are found here. |
|
|
|
tempo
26 Posts |
Posted - 14 Nov 2002 : 18:02:31
|
I left the GM over lunch idling. When I came back it had locked up. When I reset it gets stuck at the same point with a white screen. Debug output is as follows:
Processor Initialization Table read.
Determining boot cause.
Reset detected.
Starting monitor.
C0037FFC
Waiting for timers to stabilize.
** Graphics Master Loader initializing(0x5). **
ADS Graphics Master Rom Ver. 1.79 (DRAM : 32 MB, CL:3)
(Build at 12:33:10 on Nov 28 2001)
Finding PCMCIA cards.
Reading Flash Header Size...(0xef9 bytes)
Reading Flash ...(from 0x40004 to 0x40efd)
Reading Hardware Table values from Flash.
This is Color, 8 Bit, Active Panel.(Width = 640, Height = 480)
8 BPP Color.
Booting from Flash.
Reading Flash Header Size...(0xdef63c bytes)
Reading Flash ...(from 0x100004 to 0xeef640)
CE starts From DRAM(0xc8200000)
ÿWindows CE Kernel for ARM Built on May 31 2002 at 14:35:27
ProcessorType=0b11 Revision=8
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800
Windows CE Image was built at 12:51:26 on Nov 1 2002.
Sp=ffffc7d0
Ethernet Detected : SMC91C96.
FlashFX Disk Detected: Ver 5.10 (Build 492)
Scanning Installed Providers
Installing Layered Providers
Installed over Windows C
E MS Tcpip [UDP/IP].
Installed over Windows CE MS Tcpip [UDP/IP].
Installed over W
indows CE MS Tcpip [TCP/IP].
Installed over Windows CE MS Tcpip [TCP/IP].
Can't Re
order under CEPreparing To Reoder Installed Chains
SMARTIO Detected : PartType:0x8535 Firmware:0x9002 Revision:5
Processor Initialization Table read.
Determining boot cause.
Reset detected.
Starting monitor.
C0037FFC
Waiting for timers to stabilize.
** Graphics Master Loader initializing(0x5). **
ADS Graphics Master Rom Ver. 1.79 (DRAM : 32 MB, CL:3)
(Build at 12:33:10 on Nov 28 2001)
Finding PCMCIA cards.
Reading Flash Header Size...(0xef9 bytes)
Reading Flash ...(from 0x40004 to 0x40efd)
Reading Hardware Table values from Flash.
This is Color, 8 Bit, Active Panel.(Width = 640, Height = 480)
8 BPP Color.
Booting from Flash.
Reading Flash Header Size...(0xdef63c bytes)
Reading Flash ...(from 0x100004 to 0xeef640)
CE starts From DRAM(0xc8200000)
Windows CE Kernel for ARM Built on May 31 2002 at 14:35:27
ProcessorType=0b11 Revision=8
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800
Windows CE Image was built at 12:51:26 on Nov 1 2002.
Sp=ffffc7d0
Ethernet Detected : SMC91C96.
FlashFX Disk Detected: Ver 5.10 (Build 492)
Scanning Installed Providers
Installing Layered Providers
Installed over Windows C
E MS Tcpip [UDP/IP].
Installed over Windows CE MS Tcpip [UDP/IP].
Installed over W
indows CE MS Tcpip [TCP/IP].
Installed over Windows CE MS Tcpip [TCP/IP].
Can't Re
order under CEPreparing To Reoder Installed Chains
SMARTIO Detected : PartType:0x8535 Firmware:0x9002 Revision:5
That's as far as it gets.
Paul Saunders - Tempo |
|
|
| |
Topic |
|
All Forums
Microsoft Windows CE
Graphics Master CE.NET Release
Forum Locked
Topic Locked
Printer Friendly