All Forums
 Microsoft Windows CE
 eVC Application Development
 eVC, CE 3.0: debug strings to all ports?		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

anatolyk

9 Posts
Posted - 25 Apr 2003 :  21:41:23  Show Profile  Email Poster
I'm using Bitsy Plus CE 3.0, eVC++ 3.0 in vanilla configuration: primary connection through ActiveSync on COM1 + Ethernet tcp/ip.

When running my app under eVC debugger, I see debug output strings sent to COM2 and COM3. I write debug output via MS TRACE() macro which calls ::AfxTrace(). (I also see debug outpur in the "Debug" pane of eVC framework.)

Is such "broadcast" normal?
How do I turn it off?


akidder

1519 Posts
Posted - 29 Apr 2003 :  17:13:28  Show Profile  Email Poster
Anatoly and I discussed this further. It appears that the COM2 observation might have been an error, as we couldn't reproduce it. COM3 debug output is normal.

If anyone else sees suspicious behavior like this, let us know. We're always on the lookout for issues that might have slipped past us!
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000