Eurotech Support Forums - AGX mechanical drawings and models

All Forums

Documentation

AGX mechanical drawings and models

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

akidder

1519 Posts

Posted - 06 Aug 2003 : 15:24:07

AGX Mechanical Drawings and Models

These mechanical drawings show the dimensions and layout of the AGX. All dimensions are shown in inches.

3-D mechanical models of the AGX are also posted below in Pro/ENGINEER (Pro/E) and IGES formats. For production customers, ADS can supply models in other formats. Contact us if you need one of these other 3D models to develop your product.

Board revision 2

Note: The mechanical drawings are labeled as rev 1, but apply to rev 2 of the AGX PWB (printed wiring board).

2D: PDF (579 kB)

3D: Pro/E (13 MB)
IGES (20 MB)

Edited by akidder 18-Dec-2003: Add Pro/E model.
Edited by akidder 26-Feb-2004: Add IGES model.

akidder

1519 Posts

Posted - 18 Dec 2003 : 16:02:50

We've added the Pro/E models to this post for customers who use virtual models to develop their enclosures.

Please confirm critical dimensions against a production board before finalizing your enclosure design.

akidder

1519 Posts

Posted - 26 Feb 2004 : 18:46:18

We've added the IGES model for the AGX.

Reportedly SolidWorks 2004 does a better job of importing the IGES models of our systems than it does with Pro/E models.

akidder

1519 Posts

Posted - 18 Mar 2004 : 13:46:16

We've added an ACIS model of the AGX.

Solid Edge v15 apparently had trouble importing the IGES and STEP models posted.

akidder

1519 Posts

Posted - 19 Mar 2004 : 13:52:43

We've added a simpler (and smaller) version of the ACIS model which retains the key mechanical elements but eliminates the small details that make the file bulky to import.

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.03 seconds.

Snitz Forums 2000