All Forums
 Hardware
 Displays
 BitsyX Colors		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

sreynard

5 Posts
Posted - 13 Oct 2003 :  17:16:59  Show Profile  Email Poster
I just received a several BitsyX and companion boards. Connecting a "16bit" display cable from a GM and an LQ64D343 flat pannel, I am getting strange colors with both the 8bit and 16bit register.txt files (for the BitsyX). I.E. my Penguin has green feet! Does the BitsyX require a different "16bit" cable? Could you please post a schematic for this cable in the Forum?

Thanks

bngo

4 Posts
Posted - 13 Oct 2003 :  17:59:01  Show Profile  Email Poster
Hi,

BitsyX needs "16bit" display cable either you set "8bit" or "16bit" display in register.txt. if you have "16bit" display cable, can you give me the ADS part number? I want to make sure that you have correct cable. BitsyX doesn't require a different "16bit" cable.

Brian
Go to Top of Page

akidder

1519 Posts
Posted - 14 Oct 2003 :  12:42:19  Show Profile  Email Poster
We sent sreynard a cable drawing directly and have posted additional cable drawings at topic 1202.

The good news is that the distinction between 8 and 16 bit cables goes away with the XScale processor (topic 990). Color confusion should fade away as our customers phase ADS XScale designs into their products.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000