Eurotech Support Forums - Debug issues with the AGX

All Forums

Microsoft Windows CE

.NET Application Development

Debug issues with the AGX

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

Raleigh

7 Posts

Posted - 09 Dec 2003 : 09:00:55

I'm currently having issues while in a debug session over ethernet on the AGX system board.

- I run the SD AuthUtil and run the auth component from the VS.net IDE to make my initial connection.

- I then debug my application on the IDE stepping through code line by line.

- Intermittently I get a connection lost message on the IDE and I must completely restart the AGX and do all of this set up again (except each time the system boots up and debug code is deployed for a first time - the framework, sqlce, etc have to be reinstalled all over again.

- This gets tiresome as it seems the AGX just loses its IP address maybe once every so often and does not re-establish itself unless it is rebooted.

- Any Ideas?

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.02 seconds.

Snitz Forums 2000