Author |
Topic |
|
jhess
135 Posts |
Posted - 28 Oct 2005 : 16:29:10
|
Debian Ramdisk 2005-10-25 (Etch) Debian Ramdisk 2005-10-25 is a root file system that is derived from the Debian (Etch) distribution and is trimmed down to fit (compressed) in a 5MB partition in on-board flash. The bootloader will copy the ramdisk.gz image from on-board flash or an ATA flash card into RAM where the kernel will find and uncompress it during start up.
The following files are included in this release: bitsyXb/root_config_ramonflash.txt bitsyXb/tty_config.txt bitsyXb/root_config.txt bitsyXb/start.txt sphere/root_config_ramonflash.txt sphere/tty_config.txt sphere/root_config.txt sphere/start.txt vix/root_config_ramonflash.txt vix/tty_config.txt vix/root_config.txt vix/start.txt MD5SUMS cmdline.txt README.txt cmdline_bitsyx.txt ramdisk.gz 700050-4102h.partno
Usage To use it, download the ramdisk.gz image from the link above and copy it to an ATA flash card. Also copy onto the card, the kernel zImage file for the kernel you want to use. This README.txt file provides more information on using the ramdisk. See the main README.txt for the 2005-10-25 ADS Debian release for detailed information about the root filesystems.
NOTE: This root filesystem only runs a single getty process for serial login. The SERIALGETTY parameter controls which serial line is used. If the SERIALGETTY parameter is not supplied in the kernel command line, the root filesystem will default to ttyS0. To login on a different port, you will need a kernel command line that includes this parameter (e.g. to use the debug port on a BitsyX, you will need SERIALGETTY=ttyS1).
On the BitsyX, use this cmdline.txt.
On AGX, GCX and VGX, use this cmdline.txt.
On your ADS System, set the first dip switch to ON (Flash Update Mode), insert the card, and boot your system. The kernel and ramdisk root file system will be loaded from the card, and Linux will start. Booting from the card this way allows you to try different kernels and ramdisks until you satisfied - without having to erase and reprogram on-flash memory.
If and when you want to install the kernel and ramdisk and boot from on-board flash, instead of the ATA flash card, create a file named ProgramFlash.ads! on the card and reboot the system. The bootloader will erase everything in on-board flash (except the bootloader itself) and program (copy) the images on the ATA card to on-board flash. The kernel and ramdisk will be loaded from on-board flash and the ramdisk will be uncompressed and mounted when Linux starts.
Delete the ProgramFlash.ads! file and remove the ATA flash card to prevent an unnecessary erase/reprogramming of on-board flash the next time you reboot. See the bootloader manual for more information on the dip switch settings and boot options.
Verification MD5SUMS provides MD5 checksums for all files in this release.
History This ramdisk root file system is derived from Debian and supersedes our previous 2004-04-26-B release.
|
|
|
Topic |
|
|
|