All Forums
 Microsoft Windows CE
 CE Downloads and Documents
 GCX build 4.20.16, serial port?		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

dcx

35 Posts
Posted - 12 May 2006 :  15:28:27  Show Profile  Email Poster
I noticed that this version was supposed to fix some issues with the serial port, what were the issues?

I seem to be having an issue that could be serial related that I was not having in 4.20.5.

akidder

1519 Posts
Posted - 12 May 2006 :  18:34:50  Show Profile  Email Poster
I think the issue was that one of the COM ports wouldn't show up because the of an issue in the registry settings.

What are you experiencing?
Go to Top of Page

dcx

35 Posts
Posted - 15 May 2006 :  08:43:39  Show Profile  Email Poster
It seems that some of the time the data I am writing to com 2 is not getting through to the device connected to com 2. This happens on a regular basis in versions 4.20.12 & .16, however I was previously using .5 and didn't see this issue, so if it did occur it was very rare. The only thing that I changed was the OS.
Go to Top of Page

akidder

1519 Posts
Posted - 15 May 2006 :  10:17:26  Show Profile  Email Poster
Thanks for the details. What baud rate are you using? Do you have the handshanking lines (CTS/RTS) connected in this application?

We'll take a look at the port to see what might be going on.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000