All Forums
 Hardware
 Cables and Connectors
 Smaller board stack
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

scottpotter

7 Posts

Posted - 27 Feb 2007 :  00:17:18  Show Profile  Email Poster
Is there any chance I could get a version of the personality board that uses shorter board to board header connectors and standoffs? It looks like there might be 1/8" of clearance over the PCMCIA connector, and the smaller bard stacking height would help me fit in to an existing housing.

jnosek

3 Posts

Posted - 01 Mar 2007 :  15:25:07  Show Profile  Email Poster
No such option currently exists on the Bitsy Personality Board. A physical modification to the headers could be done, but the 1/8" gap is there to keep a clearance space between the botton solder joints of the connector board and the metal frame of the PCMICA connector. Shortening the gap is not recommended.
If a decrease in the height is a requirement for your project, e-mail our sales group, and they can assist you with the possible options.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000