All Forums
 Hardware
 Displays
 Display Flicker on Return from Standby		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

masseyi

20 Posts
Posted - 07 Apr 2008 :  06:46:35  Show Profile  Email Poster
When I return the bitsy plus board from stand-by the LCD disply jitters for 3-5seconds and then is ok. This only happens on a return from stand-by and not initial power on. We are using a DS90CF363A control chip and a NEC NL6448BC20-21C LCD display. I have monitored pin 4 PNL_HYSYNC and this appears to jitter for the same period.

masseyi

20 Posts
Posted - 07 Apr 2008 :  10:27:36  Show Profile  Email Poster
The screen flicker also happens when the ethernet cable is connected to the board, could this be somthing to do with the settings in the adsload file?
Go to Top of Page

cbadr

154 Posts
Posted - 08 Apr 2008 :  11:53:36  Show Profile  Email Poster
Please take a look at topic 88. If your problem persists, please contact us to discuss your application.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000