All Forums
 Microsoft Windows CE
 CE Drivers
 How to access GCX RqOnOff (J1) from Windows CE		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

jjmackay

24 Posts
Posted - 18 Jul 2008 :  14:20:39  Show Profile  Email Poster
We are moving our applications from WinCe 3.0 and GC Plus board to GCX and WinCe 5.0 I understand that to access what used to be GPIO24-27 that DIO must be used instead.

However, how do I access JP1 (ReqOnOff) that used to be mapped at GPI5 windows port?

Thanks
Serge R

ljoy

22 Posts
Posted - 18 Jul 2008 :  14:59:41  Show Profile  Email Poster
On the GCX, ReqOnOff is J1 (see GCX User Manual at Topic 1782). The board layout in the manual shows that it is located next to the mounting hole closest to the Ethernet connector.
Go to Top of Page

jjmackay

24 Posts
Posted - 21 Jul 2008 :  08:14:42  Show Profile  Email Poster
Hi, I meant programmatically? I use to open the GPI5: port to access it from the software. I need to access it on the GCX in a similar way.
Go to Top of Page

ctacke

877 Posts
Posted - 21 Jul 2008 :  09:24:27  Show Profile  Email Poster
You've not stated exactly what you want to do with JP1, but a more platform-agnostic mechanism (though still ADS specific) of trapping the On/Off is at Topic 1292.
Go to Top of Page

jjmackay

24 Posts
Posted - 21 Jul 2008 :  11:44:12  Show Profile  Email Poster
I only need to be able to read its value by polling its state. The system is polling and not event driven.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000