All Forums
 Hardware
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 GCX: Performance of SetLocalTime issues		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

jjmackay

24 Posts
Posted - 21 Apr 2009 :  13:28:43  Show Profile  Email Poster
I have noticed that on our application running on GCP/Ce 3.0, calling SetLocalTime after sleep mode is taking about 120 ms. The same, running on GCX/CE 5.0.0.23, takes about 2 seconds. This adds an unacceptable delay when the system is wake up by a customer trying to use it.

I assume that this is related to the RTC. I would like to know the reasons for this delay, and if it can be reduced. Can we disable the RTC update on the GCX?

Any information that can be helpful in explaining and reducing this delay will be much appreciated; we need to release on-street as soon as possible.

cbadr

154 Posts
Posted - 21 Apr 2009 :  18:15:53  Show Profile  Email Poster
Thank you for your post. Can you please give us some information on why you need to call SetLocalTime after sleep/wake?
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000