Eurotech Support Forums - touch panel debug output

All Forums

Microsoft Windows CE

CE Drivers

touch panel debug output

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

CHINTON

2 Posts

Posted - 28 May 2010 : 20:04:16

We trying to diagnose failing touchscreens. We are running 5.00.36 on the BitsyXB, with version 1.6 of the touchscreen driver.

We followed the directions in article 727 to enable debug output in our V1.6 driver. Is there a map of the options?

Setting ShowDebug to0x3F causes debug output that continues forever from a single touch. Setting ShowDebug to 8 produces bursts of debug output for each touch event. These are labeled ReadRawX and Y and a given set of 20 increases in value to a number as large as 61195. Are these values ADC readings?

Thanks in advance

grenierm

133 Posts

Posted - 01 Jun 2010 : 11:21:31

Hi Chinton:

Thanks for your note.

You mentioned 'failing touchscreens' in your post above; it would be more efficient to troubleshoot these failures via email so go ahead and drop us a line directly (support.us@eurotech.com) with a description of the touchscreen failures you're experiencing. Thanks very much.

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.02 seconds.

Snitz Forums 2000