All Forums
 Microsoft Windows CE
 General CE
 My Board is constantly restarting		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts
Posted - 25 Feb 2002 :  18:29:18  Show Profile  Email Poster
Q: I don't see anything on my display when I turn on my system. When I look at the output from the debug port, I see that my board is constantly restarting. What's going on?

The most likely cause of the behavior you're seeing is that you have a mismatch between the boot ROM and the version of CE loaded on your board. If you replaced the boot ROM in your system, you may have to reload CE to locate it properly in the onboard flash. If you see this behavior after loading a new CE image into the onboard flash, you probably have loaded a build for the wrong product or for a memory size different from the one your boot ROM supports.



------------------
ADS Knowledge Base
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000