All Forums
 Microsoft Windows CE
 General CE
 VGX freezes part of the way through bootup
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

SGV3000

4 Posts

Posted - 31 Jan 2012 :  10:57:12  Show Profile  Email Poster
We are running WinCE 5.0 on the VGX. My problem is that during boot, the VGX hangs at a certain point. I am reading the serial debug port through Hyper Terminal. Every time I have tried booting, the last boot loaded message displayed is "Initializing ADSmartIO Driver...". I have also tried to re-kernel the VGX. I got messages saying that the various files written for the re-kernel were successful, but it still hangs at the same message. Any suggestions?

twhite

133 Posts

Posted - 31 Jan 2012 :  11:43:34  Show Profile  Email Poster
SGV3000,

We would recommend that you erase the flash before reloading your VGX. If your bootloader is recent, you could put a file named ADSLOAD.FMT (contents are irrelevant, the filename is important) onto your load media and that will erase your flash. If that does not work for you, you can consult our online CE manuals and/or VGX manuals on how to accomplish this.

If there is anything else we can do to help, please don't hesitate to contact us at support.us@eurotech.com.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000