All Forums
 Microsoft Windows CE
 CE Downloads and Documents
 GCM DIO Driver
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

twhite

133 Posts

Posted - 19 Nov 2012 :  09:54:30  Show Profile  Email Poster
GCM DIO Driver

The following table describes how the bits are mapped in the Windows CE DIO driver on the GCM.

Mapping

DIO Pin Signal Name Location

0x00 GPIO100 J21.3
0x01 GPIO113 J22.19
0x02 GPIO114 J22.20
0x03 GPIO115 J22.21
0x04 GPIO116 J22.22
0x05 GPIO117 J22.23
0x06 GPIO121 J22.25
0x07 GPIO122 J22.26
0x08 GPIO123 J22.27
0x09 GPIO124 J22.28
0x0A GPIO125 J22.29
0x0B Reserved -
0x0C Reserved -
0x0D Reserved -
0x0E Reserved -
0x0F Reserved -
0x10 Reserved -
0x11 Reserved -
0x12 Reserved -
0x13 Reserved -
0x14 Reserved -
0x15 Reserved -
0x16 Reserved -
0x17 Reserved -
0x18 Reserved -
0x19 Reserved -
0x1A Reserved -
0x1B Reserved -
0x1C Reserved -
0x1D Reserved -
0x1E Reserved -
0x1F Reserved -

Legend
DIO Pin: location in DIO driver bitmap


(Added by twhite Nov 19 2012)


  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000