Eurotech Support Forums - Bitsy does not recognize cf ethernet card

All Forums

Hardware

Ethernet, IR, Serial, CAN and high speed data

Bitsy does not recognize cf ethernet card

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

pfinkbei

3 Posts

Posted - 09 Apr 2002 : 11:02:08

I have a Bitsy (ADS BITSY Windows CE Ver.(3.12)/ADS Bitsy Rom Ver. 1.71) with the optional connector board with the compact flash socket. I am using a Socket LP-E/10 compact flash ethernet card. When inserted into the Bitsy's compact flash socket it brings up the "Unidentified PCCard Adapter". If I take the same LP-E/10 and insert it into a PCMCIA adapter and into the PCMCIA socket of the Bitsy it will recognize the LP-E/10.
Also if I insert a 16M Viking compact flash into the cf socket the Bitsy it will not recognize but will in the PCMCIA socket.

Paul

akidder

1519 Posts

Posted - 09 Apr 2002 : 13:00:31

Thanks for the details of your message. One thing to check is that the connector board is fully seated onto the Bitsy. The headers from the connector board should be seated within 1mm of the bottom of the Bitsy sockets.

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.03 seconds.

Snitz Forums 2000