All Forums
 Microsoft Windows CE
 eVC Application Development
 Error: The targeted platform does not match...		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts
Posted - 26 Feb 2002 :  12:34:29  Show Profile  Email Poster
Q: I get the error message, "The targeted platform does not match the connected platform? Continue y/n?" every time I try to download my application with the remote tools.

Add the following entry to your ADSLOAD.REG file:

[HKEY_LOCAL_MACHINE\Windows CE Tools]
"Platform"="{0F9D255B-97DA-4641-A8E6-7A7411D2472F}"   ; HPC 2000
;"Platform"="{615BE235-F665-4975-8DFE-244A6160BD48}" ; ADSMAXALL300


These are the HPC2000 keys. For other devices see Topic 792


------------------
ADS Knowledge Base

Tim

39 Posts
Posted - 22 Mar 2002 :  10:39:08  Show Profile  Email Poster
My ADSLOAD.REG file has this entry and I still get the message. Any other reasons why this would happen?
Go to Top of Page

ctacke

877 Posts
Posted - 22 Mar 2002 :  11:51:31  Show Profile  Email Poster
The error is displayed when eMbedded tools determines that the Platform your project is targeting and the Platform of the connected device do not match.

If your device is has the following registry key (set by the above line in ADSLOAD.REG then it is correctly defines as an HPC 2000:

HKEY_LOCAL_MACHINE\Windows CE Tools\Platform
{0F9D255B-97DA-4641-A8E6-7A7411D2472F}


Make sure that you are using the HPC 2000 SDK (not the HPC Pro SDK) and that you have correctly selected the HPC 2000 device as your build target.

-----------------
Chris Tacke, eMVP
Applied Data Support
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000