All Forums
 Hardware
 Cables and Connectors
 Keypad cable?		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

pervasive

12 Posts
Posted - 26 Sep 2002 :  09:42:40  Show Profile  Email Poster
Do you have any examples of how to hook up a keypad to the Graphics Master?

Thanks, Bill

akidder

1519 Posts
Posted - 26 Sep 2002 :  10:44:59  Show Profile  Email Poster
Hi Bill. We have a keypad cable drawing for a 4x4 Grayhill keypad. I've posted the link below. This cable is based on the serial port cable (610110-4007) included with your development system, which you can adapt for keypad use. You might also take a look at the keypad post in the ADSmartIO topic.

ADS sample cable 610110-40142 (PDF, 58kB)
Go to Top of Page

akidder

1519 Posts
Posted - 18 Dec 2002 :  17:42:53  Show Profile  Email Poster
The keypad used in this example is Grayhill 96BB2-006-R (or -F). It's a 4x4 keypad with keys labeled 0-9, A-D, *, and #. This keypad is useful when prototyping a system that will use the keypad scan. You can configure two or more in a matrix to simulate larger keypads.
Go to Top of Page

akidder

1519 Posts
Posted - 11 Feb 2003 :  10:46:52  Show Profile  Email Poster
Here's what the keypads look like (these shown are for front panel mount):


Keypads like these are useful for prototyping, but generally don't meet most applications' requirements for layout or labeling.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000