All Forums
 Microsoft Windows CE
 General CE
 Activesync not reliable...		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

briano

18 Posts
Posted - 26 Sep 2002 :  15:49:40  Show Profile  Email Poster
Lately I'm having trouble getting ActiveSync to connect.

Symptoms:

Sometimes connects....
Most times doesn't.
Either I multiple retries then no error or:
Cannot start communication with the destop computer.
Remote Networking could not start tue to a critical error
(Error 678)

Please reconnect your device. If the problem persist, restart your device using the instructions provided by the manufacturer.

The development system is a Win2K laptop running ActiveSync 3.5

The target is a Bitsy....

akidder

1519 Posts
Posted - 26 Sep 2002 :  16:44:05  Show Profile  Email Poster
Hi Brian. Are you using serial, Ethernet or USB ActiveSync? Also, can you let us know what build of CE you're using?
Go to Top of Page

briano

18 Posts
Posted - 26 Sep 2002 :  16:46:40  Show Profile  Email Poster
It works very reliable with RS232.
I am however trying to use USB and that is the one that seems
a little flakey....

Im running CE 3.17 on a bitsy.
Win2K on my laptop running activesync 3.5
Go to Top of Page

akidder

1519 Posts
Posted - 30 Sep 2002 :  12:05:50  Show Profile  Email Poster
Hi Brian. Thanks for the details. We've gotten reports over time that the MS USB ActiveSync driver for PCs doesn't run consistently on all PCs (see the conversation under the USB ActiveSync driver download for details).

Generally, we've been recommending that developers use Ethernet ActiveSync for development, as it runs much faster than USB or serial and is very reliable.

We've got a clean laptop here running Win XP Pro that we'll try out with USB ActiveSync and Bitsy CE 3.17 to see if we have the same problem you're seeing. USB ActiveSync works reliably on PCs here, so it's been tough to even reproduce problems reported by our customers.
Go to Top of Page

briano

18 Posts
Posted - 30 Sep 2002 :  12:14:01  Show Profile  Email Poster
Thank you for the reply.
My Laptop is an IBM Thinkpad T21 running windows 2000.
With all the service packs etc.
I'd love to run with ethernet, but I was under the impression
that ethernet isn't available on my bitsy or the bitsy compact
flash connector board. So that isn't a solution for me.

If you have a laptop what is the chances that you try out the
IrDA adaptors with it and let me know how that goes?
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000