All Forums
 Embedded Linux
 Linux FAQ
 Linux Getting Started (obsolete)		  Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts
Posted - 20 Mar 2002 :  13:48:16  Show Profile  Email Poster
Linux Getting Started

Note that this topic has been superseded with a new Getting Started topic.


Your evaluation system has been prepared with demonstration software that runs when you power up the system. You can enter familiar Linux commands at the command prompt by connecting an RS232 terminal (38400 baud, N-8-1, no handshaking) to the debug port. The User Name is 'root'. The password is 'rootme' (or blank on our older ramdisk root file systems). Type "help" to see a list of available commands.

To begin developing software for your board, you'll need to:

Once you've gotten started, you may want to consider these other sources of linux related information:
09-Dec-2006: rwhaley - add reference to the replacement topic
01-Dec-2004: jlackey - delete obsolete info and add debug port and Debian links
23-Jun-2004: jlackey - note exceptions for full Debian evaluation systems
15-Jan-2004: akidder - add link to ADS Linux bootloader manual
14-Nov-2002: jlackey - replace the link to the Linux Download forum with a link to the kernel and root file system list.
Edited by - adrian on 07 Jan 2008 15:16:44
  Topic  
 Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000