| Author |
Topic |
|
|
jeffreyeshaver
9 Posts |
 Posted - 02 Oct 2003 : 10:19:49
|
| I just upgraded my BitsyX to boot rom 1.07. All went well. After downloading 4.10.27 (both the 8bpp configuration - adsload.hwt and adsload.reg, and the nk.bin, ce.bib, and regini.ini files) when I attempt to boot, the display is completely garbled (black and white vertical lines) and when I attempt to connect the USB cable to my desktop (for ActiveSync), I get a message on my desktop machine that the attached USB device has failed. I made no changes to any of the config files that I downloaded and I have nothing plugged into the PCMCIA slot. What's wrong? |
|
|
ctacke
877 Posts |
Posted - 02 Oct 2003 : 10:30:46
|
| What kind of information are you getting from the debug port? |
 |
|
|
jeffreyeshaver
9 Posts |
Posted - 02 Oct 2003 : 10:49:43
|
Hey Chris, Here's the output from the debug window when I'm upgrading:
Reset Detected
******* BitsyX Initialization*******
CPU ID = A0 PXA255
SDCLK[1] = MemClk
MemClk = 99.53 MHz
Run Mode = 4 * MemClk
Turbo Mode = Run Mode
Mode: RUN
Reading Flash ...(from 0x40004 to 0x409ab)
Reading Hardware Ta
Microsoft Windows CE Ethernet Boot Loader
Copyright (c) 2001 Microsoft Corporation
Copyright (c) 2001 Intel Corporation
Copyright (c) 2002~2003 ADS BitsyX Bootloader Ver (1.07 )
(Built at 18:22:15 on Jul 24 2003)
CPLD Version = 0x3
DipSwitch = 0x3
BootSwitch = 0x8
ADSLOAD.ROM : Reading ... Writing...
Programming flash (this will also take a few seconds).
File Size = 262144(0x40000) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash...(from 0x0 to 0x40000).
Compare Memory with Flash, Successfully Done !!!
ADSLOAD.HWT : Reading ... Writing...
Programming flash (this will also take a few seconds).
File Size = 2471(0x9A7) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0x9a7 bytes) .
Writing Flash...(from 0x40004 to 0x409ab).
Compare Memory with Flash, Successfully Done !!!
ADSLOAD.REG : Reading ... Writing...
Programming flash (this will also take a few seconds).
File Size = 3986(0xF92) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0xf92 bytes) .
Writing Flash...(from 0x80004 to 0x80f96).
Compare Memory with Flash, Successfully Done !!!
ADSLOAD.EXE : Reading ... Writing...
Failed to load ADSLOAD.EXE from an ATA Flash Card.
ADSLOAD.BMP : Reading ... Writing...
Failed to load ADSLOAD.BMP from an ATA Flash Card.
NK.BIN : Reading ... Writing...
Programming flash (this will also take a few minutes).
File Size = 16578232(0xFCF6B8) bytes .
Erasing flash...
Successfully Erased !!!!
Writing Flash Header Size...(0xfcf6b8 bytes) .
Writing Flash Header Size...(0x800b8000 bytes) .
Writing Flash...(from 0x200008 to 0x011cf6c0).
Compare Memory with Flash, Successfully Done !!!
RegBackup : Erasing...
Reading Flash ...(from 0x40004 to 0x409ab)
Reading Hardware Table(ADSLOAD.HWT) from Flash.
Booting from Flash.
Reading Flash ...(from 0x200008 to 0x011cf6c0)
CE starts From DRAM(0x800b8000
Windows CE Kernel for ARM (Thumb Enabled) Built on Feb 12 2003 at 15:36:08
ProcessorType=02d0 Revision=6
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800
Registry area is blank.
Sp=ffffc7d0
FlashFX Disk Detected: Ver 5.10 (Build 492)
No SMC Chips.
Scanning Installed Providers
Installing Layered Providers
Installed over Windows CE MS Tcpip [UDP/IP].
Installed over Windows CE MS Tcpip [UDP/IP].
Installed over Windows CE MS Tcpip [TCP/IP].
Installed over Windows CE MS Tcpip [TCP/IP].
Can't Reorder under CEPreparing To Reoder Installed Chains
SMARTIO Detected : PartType=0x8535 Firmware=0x0010 Revision=2
SMARTIO : SerialClockRate=10 KBits/S(0xa7).
Microsoft Windows CE Ver. 4.10 (build 908)
BitsyX Windows CE Ver.(4.10.27)
|
|
|
|
jeffreyeshaver
9 Posts |
Posted - 02 Oct 2003 : 10:55:04
|
| Chris, After removing the CF card and rebooting, it appears to be working O.K. It appeared that the boot during which the upgrade occurred was the only one having a problem. |
|
|
| |
Topic |
|
|
|
All Forums
Microsoft Windows CE
Garbled Display and no USB After Upgrade
Forum Locked
Printer Friendly