All Forums
 Hardware
 Displays
 Changing "double-tap" response time
 Forum Locked
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts

Posted - 26 Feb 2002 :  15:23:34  Show Profile
Q: The touch panel requires me to double-tap faster/slower than I think my users will normally use. How can I change it?

Please try the following procedure for selecting a double-tap speed that's acceptable for your application:

  1. Open the Stylus applet in the Control Panel.
  2. Experiment with double-tap speeds until you find one that is acceptable.
  3. Click OK in the Stylus Properties applet.
  4. Run the WindowsRegedit application and open the HKEY_CURENT_USERControlPanelPen key. If Regedit was already running, you may need to refresh in order to see the Pen key.
  5. Record the (hex) values for DblTapDist and DblTapTime
  6. Modify your ADSLOAD.REG file with the (hex) settings you recorded in step 4.
    [HKEY_CURRENT_USER\ControlPanel\Pen]
    "DblTapDist"=dword:05
    "DblTapTime"=dword:125

------------------
ADS Knowledge Base

For further reading about touch panels on ADS products, see the touch panel topic index.
  Topic  
 Forum Locked
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000